The development of smart life has increased the use of smart products. Smart toilets are very common in our lives, because smart toilets have too many advantages and solve many problems for our lives, so how much do you know about smart toilets? The following editor will introduce you to smart toilets Relevant knowledge and installation method.
Advantages of smart toilets
The smart toilet has a special women’s washing function, which is specially designed for women. According to women’s characteristics, the nozzle is gentle and dense with small water lines, which has achieved the best cleaning effect. Just press the function button after the toilet is finished. . Many women’s gynecological diseases are caused by hygienic problems. The smart toilet cares for women, builds the first line of defense for women’s gynecological diseases, and is the confidant of women’s private space.
For these special groups of people, they all have obstacles in their movements and are relatively weak in body. For example, if the toilet seat is cold in winter, it will cause physical stimulation to these special groups of people with relatively weak constitutions. For example, when going to the toilet to finish cleaning work, you have to bend over. Elderly people and people with disabilities are also things that are not so easy to complete, and there is no need to flush after the toilet is completed, so as to avoid the embarrassment of forgetting to flush. These problems will all be solved by smart toilets.
The smart toilet has the function of laxative and anti-hemorrhoids. Constipation affects human health very much, and it can cause many diseases.
Smart toilet installation steps
1. Before installation, a water stop valve must be installed so that the water source can be disconnected during maintenance or repair. Otherwise, you will encounter a lot of trouble in maintenance in the future.
2. When installing, you must use a level ruler to measure the position to keep the front and rear, left and right at the same level, otherwise there will be a siphon effect or poor cleaning effect.
3. Install the toilet sealing ring. These are consistent with non-intelligent products, preventing leakage of drainage pipes, resulting in poor siphon effect or overflow of dirt.
4. The difference from ordinary toilets is that smart toilets require power and have higher requirements for the installation environment. The toilet must have a power socket. To keep the position of the power socket more than 0.8 meters from the ground, and try to stay away from places with water such as bathtubs and faucets, the grounding wire must be used. For safety reasons, it is recommended to install a leakage protector or an insulating transformer, and the power socket must be a three-hole socket.
5. Pay attention to the water pressure of the incoming water. Some intelligent automatic toilets are designed without a water tank, so the water inlet pressure of such products is different from that of ordinary toilets. The water inlet requirement is 0.07MPa (20L/Min flow) ~ 0.75MPa (hydrostatic pressure).
6. Finally, a test is required before the installation is completed. Before connecting the toilet water circuit to the water stop valve, first open the water valve to drain some of the water that has just arrived inside, so as to prevent impurities from clogging the smart toilet water inlet valve.
