The sunken design usually combines two spaces with different ground heights into an overall large space. This makes the atmosphere of the whole room more open, and at the same time achieves a sense of multiple layers, so that people living in different areas will have different visual effects.
There are many benefits of sunken design. Have you ever seen a sunken bathtub? I didn’t expect that a small bathroom could steal space like this. It’s really insightful. If you have the opportunity, you must try it!
The sunken bathtub is also very simple to do. First of all, the depth of the sunken bathtub must be determined. Generally speaking, it is enough to hollow down about 60 cm, and the length of the bathtub is 1.5 meters to 2 meters.
After determining the size of the bathtub, you can start digging, but pay attention to the slope treatment of the bottom of the bathtub, so that the floor drain is at the lowest point, so that the drainage is more effective.
If you want the bathtub to be more beautiful, you can paste tiles, cement pouring or mosaics, and the effect is very good.
After doing it, you must do a closed water test, which can prevent the problem of leakage and avoid more troublesome maintenance in the later stage.
Compared with the built-in bathtub, the sunken bathtub will not occupy the space above, especially suitable for the bathroom with a small area, and will not produce a feeling of depression.
Of course, the installation of a sunken bathtub needs to consider various conditions such as the structure of the house, and not all bathrooms can be installed.
Because of the material, it will have its own “cold feeling”. It is best to put down the hot water and rinse it before taking a bath.
Tiles and mosaics are prone to slip and fall accidents. It is better to choose non-slip materials and put a floor mat to be safer.
The content of this article comes from the Internet, edited by Qijia Xiaobian, and deleted for infringement, thank you!
