When the faucet is not turned correctly, you can use a wrench to turn the faucet clockwise until it cannot be turned, and then turn the faucet counterclockwise, and finally back to the right. If the effect is not good, you can close the water inlet valve, and then remove the faucet and reassemble it, you can make it back to the right, but the assembly should ensure that the faucet is tightened to avoid water leakage.
1. Manual correction
The faucet can be corrected manually. Use a wrench to hold the faucet in place. Turn it clockwise until the faucet can no longer turn, then turn it counterclockwise until the faucet is right.
2. Reinstall it
If the above method does not turn the faucet right, you can reinstall it. First turn off the water valve in your home, turn on the faucet to drain excess water from the pipe, then remove the faucet with a wrench, wrap raw tape around it and reassemble it on the pipe.
3. Select methods
To buy a faucet, first of all, we should look at the surface, choose the faucet without obvious pores, spots, rust stains on the surface to buy, then we can observe the handle, the quality of the faucet handle is relatively light, rotation will not have obvious blocking sense, and the switch has no obvious gap.
