HOMENews

The method and process of central air conditioning air duct cleaning

The method and process of central air conditioning air duct cleaning

2023-02-20 03:02:09

Now there are many larger homes and some shopping malls and other large areas will be installed to use central air conditioning, compared to ordinary air conditioning, central air conditioning to control the temperature of a larger area. But once the central air conditioner has been in use for a long time, then we need to do the necessary cleaning work on it. Today, let’s learn the method and process of central air conditioning air duct cleaning.

Central air conditioning air duct cleaning methods

Direct vacuum method (suitable for large and medium-sized rectangular air ducts): remove various air outlets, measure the dust accumulation in the air ducts by professional units, put in the inspection robot to observe the internal situation of the air ducts, determine the cleaning plan (CD can be made), put in the cleaning robot to loosen the dust accumulation, put in the vacuum robot to suck away the dust, put in the spray disinfection robot to spray disinfectant, put in the inspection robot to observe the air ducts after cleaning (CD can be made) ), professional units measure the situation after air duct cleaning, install various air outlets, and issue cleaning completion reports.

Flexible shaft cleaning method (suitable for any size rectangular, square, round duct): remove all kinds of air openings, professional units to determine the dust accumulation in the duct, put in the inspection robot, observe the internal situation of the duct, determine the cleaning plan (CD can be made), place two air bags at the two ends of the duct to be cleaned and open a round process hole on one side, and connect the hole to the inlet of the trap with a hose, then put in the other side. The dust will be sucked away by the trap at the same time, that is, the “Young dust vacuum method” (or by working with a special high-pressure vacuum cleaner at the same time to achieve simultaneous cleaning and vacuuming of the above-mentioned air ducts, “direct vacuum method”). The disinfectant is sprayed by the machine, the air duct cleaning is observed by the inspection robot (CD can be made), the air duct cleaning is measured by professional units, various air outlets are installed, and the cleaning completion report is issued.

The process of central air conditioning air duct cleaning

The first step. Cleaning air conditioning ventilation duct system is firstly cleaned in layers, then each layer of air conditioning duct system is divided into several cleaning construction pipe sections, the length of each pipe section does not exceed 30 meters.

Step 2. The detection robot will work online with other sets of equipment, and the detection robot will be put into the air duct to be detected from the detection port to detect the internal pollution condition of the air duct, and through the monitoring camera unit, the internal pollution condition of the air duct and the whole detection process video can be seen on the monitor, and some relevant records can be filled in at any time.

Step 3. For small size ducts of central air conditioning ventilation system, use electric universal brush to clean up, for curved ventilation pipe sections and risers, use air soft brush or air nozzle to clean up, these cleaning and sweeping tools should work with high-power vacuum box to ensure that the dust and debris inside the duct can be effectively sucked out.

Step 4. Cleaning of vertical air ducts: Vertical air ducts and generally only in air conditioning rooms or ventilation shafts, given this situation to open the interface of the vacuum cleaner at the bottom of the air duct. At the highest point, use high pressure blowing device to repeatedly blow and wash into the pipe.
For the ducts with slope and drop greater than 38o, we also use high-pressure blowing device to repeatedly wash the ducts according to the above method.

Fifth step. After the quality of cleaning is approved, use pneumatic sprayer to spray germicidal agent (mainly composed of Neosporin, sodium hypochlorite, surfactant, etc.) to disinfect the inside of the duct.

Step 6. Once the cleaning is completed the equipment is moved to the next place and then the equipment is reinstalled for cleaning at the next location.

Step 7. The next step of cleaning, the same operation steps, but just install the dust collector air outlet for the import of the pneumatic brush, the next neighboring air outlet for the dust collector connection port, the air bag on the back end of the dust collector inflatable seal, and another air bag to seal the cleaned part to prevent secondary pollution.

Central air conditioning duct cleaning is very important, the user must be regularly cleaned, otherwise it will affect the use of central air conditioning effect, and may even damage the central air conditioning, it is more than worth the loss, so be sure to learn the above central air conditioning duct cleaning methods and processes.