How to recuperate radiator? Radiator heating is one of the most common forms of household heating, in the north central region has a common user group. There are many kinds of radiator, quality and installation technology also exist the problem of good and bad, long time use of radiator must be held on the radiator recuperation, radiator should be how recuperation, the following content is the small knowledge of radiator maintenance recuperation.
[1] Radiator maintenance and recuperation method one
The place near the radiator in the room should keep a certain heat dissipation space, do not pile up debris on the radiator or radiator before, otherwise it will affect the heat dissipation effect of the radiator.
[2] radiator maintenance and recuperation mode two
Heating family should pay attention to: heating pipe on the valve can not be switched at will. The first movement of the heating system, as usual need to be adjusted, detailed to each household is to adjust the valve of each riser to the right position, open the manual air release valve of each radiator, rolling the existence of the air in the radiator, or open the exhaust valve of the air collection tank installed on the top of the system, until each radiator is hot up, debugging is completed. Once debugging is complete, the valve should be secure and cannot be opened and closed at will.
[3] radiator recuperation maintenance method three
Radiator can not arbitrarily change the location, radiator installation is placed in favor of indoor heating position, to ensure the air convection and indoor temperature is relatively average, once changed the position will cause the imbalance of indoor temperature, on the other hand once the pipeline, radiator is moved, it will be unusually easy to leak, causing unnecessary losses to the home.
[4] radiator recuperation maintenance mode four
Water can not be released from the system at will, the lack of hot water in the pipeline, it is necessary to make up for the cold water to keep a certain pressure in the pipe network system, the more hot water loss, the water temperature in the pipe network will drop rapidly, resulting in the reduction of indoor temperature. The accomplices with steel heating should pay attention to closing the valve in real time when they stop warming, so that the heating is full of water, which can extend the applicable life, and the radiator with copper and aluminum composite can also be full of water.
