Get the second-hand house, we don’t rush to sign the contract, pay the cost, or need to have a comprehensive acceptance of the house, so, how much understanding of the second-hand house acceptance? Today Xiaobian to tell you a few details of the second-hand housing acceptance, the following Xiaobian together to understand the details.
First, the second-hand house acceptance check the wall condition
Wall focus on checking smoothness, see whether water seepage, whether there are cracks, especially to see whether some walls have traces of water, especially some gables, kitchen sanitary top, external walls and other places, if there is, be sure to find out the reason as soon as possible.
Second, second-hand house acceptance inspection anti-theft door
See whether the security door has scratches, whether the door is deformed, whether the seal of the door and frame is tight, and the door and lock switch should be flexible; Observe the cat eye, whether loose, unclear, incomplete vision or because of foreign bodies can not see clearly phenomenon; Check if the doorbell doesn’t ring or doesn’t ring.
Third, second-hand house acceptance inspection window
Check whether the seal of the doors and Windows is good, can use a long piece of paper on the sealing point, close the door to press the paper to pull out, more test to see whether the pressure of the seal strip is uniform; See push and pull the window screen and sash on the window, push flexible, no collision with each other; There should be a blocking cap on the window frame outside the window to prevent foreign matter blockage affecting drainage, resulting in rain window water; Double glass inside and outside are not clean should be put forward to remove the glass clean, otherwise it is not easy to solve later.
Four, second-hand house acceptance inspection pipeline
To see whether the pipe installation is smooth and sealed, shake the heating pipe and upper water pipe with your hand vigorously, should be fixed firmly. If loose, it should be re-fixed. Open the water valve to see whether the drainage is smooth, and wipe the bottom of the upper and lower pipes with toilet paper at the same time.
Second-hand house acceptance inspection kitchen flue method: paper roll ignition fire smoke, put in about 10 cm under the smoke tunnel, see if the smoke rises to the smoke tunnel immediately turn away.
Second-hand house acceptance inspection method of gas pipeline: Put the smoking paper roll near the alarm device, see whether the alarm device sensitive action, alarm sound and light prompt at the same time close the intake solenoid valve. If you cannot act, repair it in time.
Five, second-hand housing acceptance inspection water situation
The basin is filled with water first, and then the water is filled to each launching place, which is the basin launching, the bathtub launching, the toilet launching, the kitchen and the sanitary floor drain on the balcony, etc. Basically, each outlet should be filled with two POTS of water, which should hear the sound of gluing and rumbling, and there is no water on the surface.
The above knowledge about the acceptance of second-hand housing Xiaobian is introduced here, we have a more profound understanding of the acceptance of second-hand housing? I hope I can help you.
