The waterproof decoration of the bathroom is a priority when people are decorating the bathroom, because the waterproof decoration of the bathroom is the main content of the bathroom decoration. If the waterproof decoration of the bathroom is not in place, it will bring endless troubles in the future! Therefore, the bathroom The waterproof decoration of the bathroom is very important in the bathroom decoration! So now I would like to share with you the precautions for the waterproof decoration of the bathroom:
1. The pipeline budget cannot be saved. During the decoration process, most of the water and electricity pipelines are hidden. If the water and electricity are not done well, it is useless to decorate well. After moving in, if you find such and other problems, you need to rework and redo it. It will be a big trouble. Therefore, when making the budget at the beginning, this piece must not be saved. Choose high-quality products of big brands, and carry out wiring regularly in accordance with the basic regulations of home decoration.
2. Relay the floor tiles to make the ground waterproof
If it is necessary to replace the original floor tiles in the bathroom, after the original floor tiles are chiseled off, the ground must be leveled with cement mortar first, and then waterproofed, so as to avoid leakage of the waterproof coating due to uneven thickness. Before doing waterproofing, be sure to clean the ground, and repeatedly paint it with polyurethane waterproof paint 2 to 3 times.
Experience: The joints between the wall and the ground and the joints between the pipes and the ground between the upper and lower water are the places where problems are most likely to occur. Workers must be supervised to deal with these corners and corners, and the waterproof coating must be applied in place. The decoration team is required to make cement mulch for the upper and lower water pipes of the kitchen and bathroom, and paint 10 to 20 cm of polyurethane waterproof coating upward from the ground, and then redo the polyurethane waterproofing on the ground, and add the original waterproof layer to form a composite waterproof layer. to enhance water resistance.
Third, the wall must be waterproofed
The water will splash on the adjacent wall when bathing in the bathroom. If there is no protection of the waterproof layer, the partition wall and the opposite corner wall are prone to moisture and mildew. So be sure to do a good job of waterproofing the wall before laying wall tiles. In general waterproof treatment, the wall surface should be waterproofed to a height of 30 cm, but for non-load-bearing light-weight walls, the entire wall must be waterproofed, at least 1.8 meters high.
Experience: The waterproofing of the wall adjacent to the shower position should also be 1.8 meters high. If a bathtub is used, the height of the waterproof coating on the wall adjacent to the bathtub should also be higher than the upper edge of the bathtub.
