1、Warm water with detergent
Use warm water plus detergent to clean, any usual detergent, detergent can be.
2、Brush with a brush
Most kettles have small teeth, so use a long-handled brush like a milk bottle brush to brush the inside and bottom. The brush will be easier to get rid of the sticky residue and mold in the kettle, which can’t be flushed out by just flushing.
3, the lid to wash
When drinking water, the liquid must pass through the suction nozzle, so do not forget to wash it; it is recommended to fill the kettle with some detergent, and then press the kettle to let the detergent flow out from the suction nozzle.
4、Wash after each use
Just like you will wash the glass after each use, the bicycle water bottle should also be washed after each use. Even if you only drink water, you may sweat, or eat equipment and leave residue in the spout of the kettle, it is easy to mold, so each time you should at least flush a water.
5, do not use vegetable gourd cloth
The usual green dishwashing cloth, will scratch the kettle but more easily hide dirt.
6, should be thrown away
Just rinse on time, the kettle will inevitably hide dirt after a long time, if the visual inspection, found that the internal dirt is not easy to get rid of, then it is almost time for a new kettle.
7, no strong detergent
If you think you need to use a stronger detergent such as bleach, the kettle can almost be thrown into the acceptance tube. And if it is not flushed clean, it may instead contaminate the kettle.
8, let the water air dry
After each wash, remember to open the lid upside down and let the water dry naturally to avoid the growth of mold. Never in the bottle is not dry, the lid on the cover.
