What if the faucet leaks? Are you in your daily life have encountered such troubles? Now comes the opportunity. Today, Xiaobian is here to tell you what are the methods to solve the faucet leakage. I hope the introduction of Xiaobian can help you.
The faucet is an essential small item in home life. It is used very frequently. In the use of the faucet, there is likely to be water leakage.
Tools: 1. One flat-mouth screwdriver.2. One adjustable wrench with an opening of 30-50.
Follow the steps of faucet maintenance to begin ~!
1. If the hot and cold taps are controlled by a main inlet valve, close the main valve. When the hot and cold inlet pipes are separated, close the corresponding two valves.
2. Use a flat-mouth screwdriver to open the accessory “01 Hot and Cold Label (handle fixing screw hole plug)” shown above;
3. Put the flat-mouth screwdriver into the hole plug of the handle fixing screw (hot and cold mark holes) and rotate the screwdriver counterclockwise (left) for about 3 turns;
4, with the left hand to grasp the faucet handle, push upward, at the same time with the screwdriver back handle (must be non-metallic material, otherwise it will damage the surface of the faucet) gently tap upward, so that the accessory “02 water handle” is separated;
5, counterclockwise (left) accessories “03 end cover”, the end cover is separated from the main body;
6. Place the adjustable wrench at the beginning of the accessory “04 core body tight hexagonal sleeve” in the hexagonal position, adjust the size of the adjustable wrench at the beginning, rotate counterclockwise, remove the ceramic spool for inspection, if intact, turn clockwise (right), tighten the force; If damaged, replace the spool with a new one.
7. Reinstall the original parts “03 end cover”, “02 outlet handle”, “01 Hot and cold label (note that red represents hot water side, blue represents cold water side)”
