Air conditioning is a high-tech household appliance in our modern science and technology. Air conditioning now plays an increasingly important role in our lives. No matter in winter or summer, people like to turn on air conditioning to keep a comfortable temperature. Especially now people’s living standards are constantly improving, people’s requirements for the quality of life are also constantly improving, and more and more people are using air conditioning. Many people are trying to install their own air conditioning, so what are the specific steps to install air conditioning? Next, let’s introduce it in detail.
Describes the steps for installing air conditioners
1. First, prevent rainwater from pouring back into the room from the hole through the wall. In the process of air conditioning installation, it is necessary to make a slightly higher indoor wall hole. After the installation is completed, the gap of the hole through the wall must be blocked with putty. If the drainage hole in the corridor is used, similar problems should be noted.
2. Prevent Freon leakage during air conditioning installation. After the air conditioner is installed, the installation personnel must check the air conditioner connection to prevent the leakage of freon.
3. Prevent outdoor water leakage. When the air conditioner is heated in winter, there will be water droplets due to frost. Therefore, special attention should be paid to the outlet nozzle and outlet pipe of outdoor units when installing air conditioning.
4. Prevent indoor water leakage. To ensure that the condensate generated during the refrigeration of the air conditioner can be discharged to the outside, when installing the air conditioner, you can pour a little water into the water tray to check whether it can be discharged to the outside.
5. If the distance between the outdoor unit and the indoor unit is more than 3 meters, the refrigeration pipe and drainage pipe wire must be added to see if the copper pipe and wire is the same as the original air conditioning.
6 air conditioning outdoor unit can not be installed everywhere, the choice of its location should be conducive to the future repair and maintenance.
7. The outdoor unit (compressor) must be properly installed and levelled by the installation worker using a level.
8. The outdoor unit bracket should be equipped with the regulation of the rising bolt, and it must be enough to prevent workers from omitting a few rising bolts for the convenience of construction, which will cause a lot of trouble in the future.
9. When extending refrigeration copper pipe, gas welding will be used to weld the extended copper pipe on the original copper pipe. Pay attention to the requirement that workers use silver welding rod, and forbid the use of copper welding rod.
10. The extended refrigeration copper pipe must be tightly wrapped with insulation cover and wrapped with binding tape.
11 In the use of binding winding refrigeration pipe and wire drainage pipe also pay attention to, in accordance with the installation of air conditioning standard operation, otherwise winding will cause rain extension plastic tape flow into the house phenomenon.
12.. There should be no barrier in front of the air conditioning indoor unit to ensure the jet distance of cold air, so that the indoor temperature is more uniform.
13. Air conditioning drains must be straight and properly angled outward to facilitate smooth flow of water. If there is a bend in the middle of the drain pipe, it is easy to cause water and water flow is not smooth, resulting in indoor units to overflow water.
14.. The ideal location for the installation of the air-conditioning outdoor group is the north wall or the east wall, where the direct sunlight is less; If it must be installed on the south wall or the west wall, there must be shading measures, but it must not obstruct air circulation.
15. There are no obstacles around the air conditioning outdoor unit to maintain good heat dissipation effect. The back (side of the wall) and side of the condenser should be more than 20cm away from the obstacle, and the front (side of the exhaust air) should be more than 40cm away from the obstacle.
16. Air conditioning outdoor units are installed on solid walls or balcony floors to reduce vibration. The unit should be as close to the indoor unit as possible to reduce pipeline resistance and freon losses.
Maybe it’s a little bit more complicated, a little bit more careful, but you have to be careful. If you have to, don’t try it. You can find a professional to install it. In the installation process must pay attention to is not to lose the air conditioning parts, otherwise it is certain to be unable to complete the installation. But Xiaobian here still want to remind you, although open air conditioning temperature is more comfortable, but also moderate, otherwise easy to produce a series of physical problems.
