1, when acquiring a camcorder, pay attention to whether the battery provided is consistent with the original machine. Install the battery into the machine and examine the power.
2, in the acquisition, pay attention to the appearance of the battery is not damaged, whether the battery voltage is 12 volts, as well as the capacity of the battery, factory date, etc.
3, when using the camcorder, to reduce the number of switches, when shooting a row and then hold the next row of shooting, if the time interval is not long, do not turn off the camera, because each switch its power consumption is greater.
4, if the conditions allow should only use manual focus, zoom.
5, in the course of use if the battery indication alarm, should immediately stop using, usually with a secret with a good backup battery, two batteries can be used in turn.
6, after shooting to charge the battery in real time, using a special charger, when the indicator light from red to green, indicating that the amount of battery has 70%, green light out and then continue to charge an hour, you can stop charging. If the charging time is too long, it will cause the battery to heat up, which will shorten its service life.
7, camcorder batteries should be away from heat sources, prevent short circuit, impact and moisture. And can not be put together with chemicals.
