Use lubricants: If the metal rust of the shower head causes the blockage to be extremely serious, then use WD-40 rust removal and anti-rust lubricant. This rust removal lubricant can have exceptionally good affinity and permeability with metals. It can spread the rust and metal layers apart. Makes the contact surface between the rusted section and the metal, and leaves a precious film. Let the shower never rust to death. If the shower in your home is not made of stainless steel, this method may be used.
Use vinegar: If your shower head has been blocked for a long time, and a large number of holes are blocked. Then using the needle to Pierce one by one obviously does not show. In this case, it is recommended that you use acidizing dust removal to solve the problem of shower shower clogging. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head is submerged. Maybe after ten minutes of vinegar, you can remove the scale in the shower head.
With a needle: If the shower in your home is blocked by small holes, then let the water out first and see that the holes are blocked at the bottom. Then you have to open the shower head and see that the shower head, like the showerhead, has an unusually large number of small holes. This is where the water comes out. Then we first prepare a needle, and then use the needle to Pierce the impurities in the hole until there are no impurities in the hole. This way is the most direct, but be careful to puncture the shower hole.
What if the shower head is blocked
After a period of durable use of the shower head, there will be clogged signs this is very natural, this does not mean that the shower head is broken, you do not melancholy, do not need to buy a new, if this is due to the occurrence of scale after durable water, you only need to disassemble the shower head washing.
Hear disassembly washing many people may think that poor, really simple operation, it is not to ask you to completely disassemble the shower head into a piece, the most important is to let you wash the shower head.
The main material of washing shower head is white vinegar, which is also a kind of material in the family, we will tear down the shower, put it in a small basin with white vinegar to soak for about two hours, after soaking with a toothbrush, and then wash with water to clean; If there is any hard water sediment, scrub with lemon slices.
Washing the shower head is rare and should not use strong acid (preferably white vinegar) to avoid erosion on the outside of the shower. In order to ensure that the nozzle is not blocked, it is best to wash the shower nozzle every half a year or less, so that you are no longer depressed when the shower nozzle is suddenly blocked, so that it affects your bath mood.
In order to ensure the service life of the shower head, it is best to let it not be directly below the shower when installing, and the distance from the shower is best more than 60cm, and often use a soft cloth to stick a little flour to wipe the outside of the shower head, so that it is still as new.
