Toilet (toilet) blockages are usually divided into two types: one is blockage of soft objects (usually feces, paper towels, rags, etc.), and the other is blockage of hard objects (toothbrush, plastic bottle cap, small comb, small toy) , pen, etc.). Of course, there may be other reasons for the blockage, such as the problem of the pipeline itself. Here we are talking about two common reasons.
Common methods:
1. Mop method: Use the mop mopping your home. First put the mop on the mouth of the toilet, and then turn on the water to ensure that the water submerges the mop. Then press the mop hard, stuff it into the mouth of the toilet as much as possible, and finally lift the mop as fast as possible. Repeat this action, the things in the toilet will be sucked out, and the pipeline will be unobstructed.
[How to deal with a clogged toilet in 9 easy ways] 2. Find a longer piece of plastic water pipe, connect one end to the tap water, and plug the other end into the toilet mouth, then block the toilet mouth with a rag or something, and then turn on the tap water. Use water pressure to unclog the pipes.
3. Go to a 2 yuan store or a grocery store to buy a manual unclog (something that looks like a spring), and unclog it yourself. A unclog costs a few yuan.
Specific reasons and solutions
1. The toilet is slightly blocked: it is usually caused by toilet paper, sanitary napkins, towels, etc., which can be cleared directly by using a pipe dredging machine or a simple dredging tool.
2. Blockage of hard objects in the toilet: When using it, it accidentally falls into hard objects such as plastic brushes, bottle caps, soap, and combs. If this kind of blockage is slight, you can directly use a pipe dredger or a simple dredge to dredge it directly. When it is serious, you must disassemble the toilet to clear it. This situation can only be completely solved by getting the stuff out.
3. The toilet is aging and clogged: the toilet has been used for a long time, and it is inevitable that scale will form on the inner wall. The toilet flushed smoothly.
4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet to not flow smoothly, and the water level of the toilet tank is not high enough to affect the flushing effect.
5. Squat hole to toilet: Some old houses are built with a squat pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow. When remaking the toilet, it is best to replace the bottom elbow with a direct bend. If you can’t change it, then you must do a good job of cleaning the bottom reverse water bend before installing the toilet. The installation is to avoid letting cement or tile fragments fall into it.
6. Hair causes sewer blockage: After a period of use in the sewer, the hair that usually takes a bath will hang on the pipe wall and accumulate and cause blockage. Hair will generally cause blockage of the bathroom floor drain, washbasin, bathtub, and shower room. Therefore, during normal use, the floor drain cover and other protective facilities must be covered. If there is hair, you can pick it up and throw it into the trash can.
What should I do if there is too much hair and the sewer is blocked? This kind of blockage can be solved easily. You can use a hand unclog to unclog the sewer. If it is serious, you have to use a pipe unclog machine.
Precautions
?If the above solutions are invalid, then only professionals can be hired.
