HOMENews

Toilet design toilet wall tile selection

Toilet design toilet wall tile selection

2023-05-16 04:05:12

There are many ways to design toilet wall tiles, according to the color collocation according to the material collocation, the color and texture collocation of toilet wall tiles is really an art, clever collocation will create extraordinary artistic effect.

Every stylish bathroom design requires an artistic combination of wall tiles. Bathroom wall tile color and texture collocation is really an art, clever collocation will shape extraordinary artistic effect. At the same time also need to ensure the safety and durable effect. What is the choice of bathroom wall tile? Check it out with us!

First, high quality wall tiles, water absorption is very low, so it can be dried quickly. If the water absorption rate of the wall tile is not indicated, you can use tea or water droplets on the back of the wall tile. After a few minutes, you can inspect the diffusion degree of water droplets. The less water absorption, the lower water absorption rate and the better quality. The wall tile with high water absorption rate will cause the wall tile surface cracking and the whole wall tile peeling off after thermal expansion and cold contraction. The toilet in the northern region with four distinct seasons should pay more attention to this problem.

Second, choose the wall brick texture density, when choosing the wall brick, you can observe whether the brick surface is smooth from the side, whether the uneven thickness of the pinhole. At the same time, the wall brick can be tapped to listen to whether the sound is crisp. The more crisp the sound, the higher the texture density of the wall brick and the better the hardness. Such wall tiles are laid to the bathroom space, which is not easy to damage, but also easy to maintain and clean.

Third, due to the larger moisture, now advocates are the wall covered. This is not only for the sake of aesthetics, but also can resist moisture erosion, protect the wall waterproof layer.

Fourth, the choice of wall brick, must be to use non-slip texture. When we go to buy this, businesses will generally remind us that the most recommended is matte surface or shallow convex concave modeling of the floor tile, the reason is very simple: non-slip. In the decoration, we can pay attention to this, the general decoration team will do, if not done, you can supervise, the ground of the toilet should be lower than the ground of other rooms 10 ~ 20 mm. When paving wall tiles, the position and size of the floor drain should be considered. Otherwise, it will spread out the gap, and there is usually the laying of the floor tile to retain 1% of the leakage slope, the lowest floor drain, in order to facilitate drainage.

Fifth, if you choose dry and wet decoration: that is, the shower area and sit stool, basin area separation. Can be through different wall brick material and color varieties, to achieve a good division, so that the two do not interfere with each other, avoid the past kind of splash, after bathing east wipe west wipe embarrassment. This is a common decoration method abroad.

What kind of wall tile is good for the toilet? Simply put, the humidity of the toilet is usually relatively high. The requirements for the wall tile are waterproof, anti-slip and wear resistance. Toilet floor tile is generally used as whole body brick, which has good anti-skid and wear resistance; Toilet wall brick usually choose glazed tile, glazed tile after glaze treatment color pattern is rich, strong anti-fouling ability.