First, how to do the toilet floor waterproof
1, replace the bathroom floor tile, after the original floor tile removal must use cement mortar to level the ground, and then do waterproof treatment, so as to avoid waterproof coating due to uneven thickness resulting in water seepage, water leakage phenomenon.
2, the gap between the floor tile must be painted in place, the gap between the bathroom wall and the ground, the gap between the water pipe and the ground are relatively easy to leak.
3, it is necessary to lay the drainage pipe and sewage pipe, paint a layer of plain cement slurry, and brush the waterproof material after the ground cement is dry.
4, clean the ground surface dust, stains, check the quality of the ground, whether there is delamination, warping, etc., if there must be timely treatment, otherwise it is useless to do waterproof.
5, check whether the quality of the tile is smooth, it is best to soak in water for a few hours before pasting the tile, be sure to pat when pasting the tile, gravity hammering will destroy the waterproof effect.
6, pay attention to the tiling construction between the corners and gaps, pay attention to the careful construction of the details of the corners and corners of the waterproof, the most easy place to leak is the details.
Second, what are the waterproof materials in the bathroom
1, polymer cement mortar waterproof coating
This kind of toilet waterproof material is mainly made of fine cement and special adhesive mixed, is one of the most common waterproof materials in interior decoration, when used, the operation is simple, convenient, very easy to use, by many decoration owners and builders.
2, acrylic waterproof coating
It is a cost-effective bathroom waterproof material, in the process of use has a very stable waterproof performance and environmental performance, and it also has a strong anti-aging property, can be suitable for all kinds of complex decoration structures, can extend the service life of the waterproof layer of the bathroom.
3, polyurethane waterproof coating (non-tar type)
It is a liquid environmentally friendly toilet waterproof material, in the process of use not only has a good adhesion and waterproof performance, but also does not volatilize pungency smell, less pollution to the surrounding environment, its products occupy a large proportion of the market share, deeply loved by consumers.
After the above introduction, everyone knows how to do the toilet floor waterproof? There are many different types of toilet waterproof materials, we can buy according to the actual decoration situation.
