The toilet is one of the necessary bathroom supplies in every household, and its importance is self-evident. When there is a problem with the toilet, do you feel helpless and quite annoyed? Don’t worry, today I will tell you how to repair the toilet combined with the 7 major failures that often occur in the toilet.
1. Slight blockage. Usually, daily necessities such as toilet paper, sanitary napkins, towels, rags, socks, etc. may be accidentally dropped into the toilet, causing a slight blockage of the toilet. In this case, you can directly use a pipe dredger or a simple dredging tool to unclog .
2. Blockage by hard objects. Bathroom items such as combs, bottle caps, soap, brushes, etc. will accidentally fall into the toilet during use. At this time, the light ones can be dredged with a pipe dredger, and the severe ones have to disassemble the toilet to take out the things.
3. Aging blockage. When your toilet has been used for a long time, it will inevitably block the vent hole due to the accumulation of dirt for a long time. At this time, you can find the vent hole and use a brush or other daily tools to scrape the dirt away, so that the toilet can be unimpeded.
4. Installation error. When installing the toilet, remember to draw a cross on the bottom outlet, so that it can be accurately aligned with the drain on the ground, otherwise the nut at the bottom of the toilet will seal the drain of the toilet, causing the toilet to flow Unsmooth, the water level of the toilet tank is not high enough, and even affects the flushing effect, and consumers have a poor sense of use.
5. Poor ventilation. When the ventilation of the toilet is not smooth enough, the toilet will also be blocked. At this time, you can tear off a small part of the black adhesive strip that the toilet is in contact with the ground, so that the inside and outside of the toilet can be ventilated.
6. The water inlet hole is leaking. Such problems should be solved according to different situations. One is that the water inlet valve nut may be loose. In this case, you only need to tighten the nut and then install the filter. The second is that the filter may be improperly installed. In this case, you should pay attention to the sealing ring inside, and then screw on the blue cover of the filter, and check whether there is water leakage. The third is that the tapered rubber pad of the water valve may be installed incorrectly, and reverse installation may cause water leakage, so please reinstall it in this case.
7. The rubber ball valve is damaged: If the rubber ball valve is damaged, the seal is not tight, and water leakage occurs, it needs to be replaced immediately.
In summary, the above 7 points are common toilet failures and toilet maintenance methods. Therefore, when you encounter a clogged toilet, don’t panic, don’t worry, first find out the problem, think about what may be causing it, and then prescribe the right medicine according to the problem.
