As we all know, the decoration of the bathroom is very complicated, especially during the secondary renovation, many people like to knock down the original bathroom wall tiles and lay new tiles, but this requires re-making the waterproofing project, if once it occurs Quality problems, ranging from water stains to the next room, to serious damage to the downstairs, so what are the precautions for the secondary decoration of the bathroom? Let’s take a look together.
How to do the secondary decoration of the bathroom
1. Buy the floor drain
First of all, the location of the floor drain must be determined, and the layout should be prepared in advance, so that there will be no confusion in the later stage. Of course, the floor drain also includes multiple areas, such as washing machines, mop pools, shower rooms, bathtubs, etc. .
2. The exhaust fan odor check valve is ready.
Secondly, the exhaust fan should be prepared, and the specifications should be kept well. Because some fans have strong and weak wind or warm air function, special wires should be used when wiring, so that it is not easy to make mistakes.
3. Sockets and toilets should be selected properly
For this kind of objects, you must buy them in advance and fix the position. Of course, there is a kind of socket with a switch on the market, which is very good, so that you don’t need to pull the plug back and forth, which is very convenient and saves electricity. For the size of the toilet It must be booked in advance, so that it will not be unusable due to size problems later.
What are the precautions for the secondary decoration of the bathroom
1. Ground treatment
If you want to replace the ground bricks, you should remove the original bricks, then use cement slurry to level the surface layer, and then do a good job of waterproofing, so as to effectively avoid leakage caused by uneven waterproof coating. It is best to use non-slip texture for floor tiles, and the size must be measured well, otherwise it is easy to leak.
2. Wall treatment
Generally speaking, the shower is mostly placed at a height of about 1.8m, so the waterproof of this area should also be 1.8m, and the non-shower area only needs to be 0.5m; but in order to strengthen the anti-proof effect, Most people will make it 1.8m. In addition, the wall tiles must be fully covered, which can not only resist moisture erosion, but also keep it clean and beautiful for a long time.
The knowledge points about the secondary decoration of the bathroom are introduced here. I believe that all the masters must have a better understanding of the secondary decoration of the bathroom.
