HOMENews

Toilet sewer pipe decoration introduction

Toilet sewer pipe decoration introduction

2022-12-13 09:12:51

The quality of the bathroom decoration depends entirely on the installation of the sewer, and the quality of the sewer in the bathroom can affect whether the sewer will return to the smell, so how to connect the sanitary sewer pipe? The following editor will bring the bathroom sewer pipe Decoration methods and precautions are for your reference.

How to connect the sanitary sewer pipe?

1. Before installing the bathroom sewer pipe, first check whether there are any damage, cracks, etc. in the decoration building material water pipe and related connecting accessories.

2. When installing the bathroom sewer pipe, the constructor should consider the thickness of the wall tiles in advance.

3. Use as few or no connecting accessories as possible under the wall and the ground, so as to reduce the hidden danger of leakage, and the installation of the connecting accessories must be firm and free of leakage.

4. When installing the sewer pipe in the bathroom, consider the installation position of the faucet of the washing machine in the home, the layout of the sewer, etc., and also pay attention to whether the position of the power socket is appropriate.

Precautions for decoration of bathroom sewer pipes

1. The bathroom water pipes basically pass through the roof, because this can reduce the chance of man-made damage, and the interface and outlet of the cold and hot pipes must be parallel. Usually, the hot pipe is on the left and the cold pipe is on the right. Wuhan Decoration Company tries to avoid bends in the design of the entire pipeline, and it must be transported away from the circuit as much as possible. The position and slope of the pipe clamp must also meet the requirements. Each valve must be installed flat to facilitate future use and maintenance.

2. When installing the hot water pipe, it is necessary to distinguish between the water inlet and the water outlet of the water heater. The main valve is connected to the water inlet, and the water outlet is connected to the pipeline leading to the bathroom. After installation, open the valve first to confirm whether there is any water leakage. If the situation occurs, then install the faucet and shower head in the bathroom.

3. The bathroom is the darkest place in the whole family and the place where moisture is most likely to accumulate, so ventilation is particularly critical. It is best if a window can be designed in the bathroom. If there is no such condition, in order to prevent mold and damp bugs in the bathroom phenomenon, in addition to installing exhaust fans, it is also necessary to avoid the phenomenon of “wrapping”. Many people like to wrap the pipes in the bathroom tightly, and this happens to cause the moisture to be wrapped in the pipes and cannot escape. So it will make the moisture in the bathroom more serious.