HOMENews

Toilet unclog tips How to install the toilet

Toilet unclog tips How to install the toilet

2023-11-12 10:11:23

First, toilet dredging tips

First, get a plastic bottle. You can see that the water level in the toilet is not moving, and the drain is clogged. Turn on the faucet and pour water into the sink, filling it about 1/3 or 1/2 of the way up the toilet. Quickly reverse the plastic bottle into the sewer mouth, squeeze the bottle several times.

1, the ordinary empty mineral water bottle cap unscrew, do not use. Use scissors to cut off the cap of the empty bottle. Keep only the bottle. Use scissors along the round mouth of the bottle, like cutting an apple, cut into a spiral, the width of about 1 cm, when cutting not necessarily cut very smooth, some barbs, better hook the debris in the toilet. Cut the spiral bottle, straighten at both ends, that is, the root is very long, the surface has a barb through the toilet utensils. When used, as long as one end is deep in the water pipe, move up and down a few times, it is easy to hook out the debris in the toilet.

2, another way to use a plastic bottle to unclog the toilet is to use the effect of water pressure, huge water pressure to block things away in an instant, the drain is clean!

Second, the installation method of the toilet

1. Determine the size of the toilet

If you want to install a toilet, you must have a toilet, you can determine the size of the toilet according to the size of your home bathroom, and then go to the market to buy your favorite toilet, and buy a stainless steel braided hose, a flange, a silicone, an electric hammer drill.

2. Check whether the sewage pipe is level with the ground

Next, check whether the sewage pipe is clogged with sediment and other debris, and clean it up; After the installation of the toilet floor check to see if it is level, if the floor is not smooth enough, you need to pave the ground to carry out the next step, which is the foundation and very important.

3. Determine the sewage center

Determining the sewage center of the toilet is actually very simple, just put the toilet upside down, it is very easy. At this time, draw a cross directly at the center of the sewage, draw a larger one, and extend to the bottom of the toilet and the feet around it, which is to facilitate the toilet drain to align the sewage center on the ground. In fact, to put it bluntly, this step is a problem of measuring the pit distance.

4. Fix the toilet

Through the above steps, we can basically fix the toilet, before fixing down, we need to put the flange on the toilet drain pipe, align with the water pipe gently and steadily down, the wall of the water pipe will be inserted into the viscous mud of the flange, play a sealing role. When fixing the toilet, the cross drawn before comes in handy. After aligning the cross, firmly press the sealing ring, and then install the screws and decorative caps of the foundation.

5. Bottom seal

Do the previous work, you can enter the later sealing work. The bottom side of the toilet can be coated with glass glue or sealed with cement. This can effectively prevent the smell of the leakage net from floating out, and keep the water in the bathroom outside.

6. Install water tank accessories

Before installing the water tank accessories, you need to wash the pipe first, which can be waterproof for 3 to 5 minutes. When the water pipe is clean, you can connect the hose with the Angle valve, and then connect the hose with the installed water tank accessories to the water valve, and then connect the water source for testing.

7. Inspection

The installation of the toilet to this step is basically complete, but it is also necessary to test whether the toilet is installed well, which is a test of what was done before. When testing, it is necessary to see whether the various connections are sealed, whether there is water leakage, and whether the inlet valve and drainage valve are smooth and flexible. If there is no problem, congratulations on successfully installing the toilet.

It can be seen that there are many tips for toilet dredging, such as the use of plastic bottles to pass the toilet, the use of water pressure, the huge water pressure to block the thing instantly pushed away, the sewer is clean!