HOMENews

Understand the importance of faucet cleaning and maintenance to build a healthy life

Understand the importance of faucet cleaning and maintenance to build a healthy life

2023-01-13 09:01:00

The tap is one of the sources of water supply in the home. People use faucets for daily cleaning, such as washing hands and washing. However, after a period of use, the faucet will inevitably produce bacteria and dirt on the surface or inside, which will affect people’s health problems. So the daily maintenance of the faucet is very necessary.

Daily maintenance skills of faucet:

Proper use and maintenance of faucets can extend their service life and keep them as bright as new.

1. Daily cleaning and maintenance of faucets

1. Clean the surface of the faucet regularly

It is best to clean the faucet every 30 days, mainly using car wax for external surface maintenance and cleaning. Usually use clean water to wash the faucet surface dirt, and then wipe dry with soft cotton cloth.

2. Clean the faucet inside

Many people only pay attention to the surface of the faucet when cleaning, but the inside of the faucet is more important. If the faucet discharge is reduced or bifurcated, it may be caused by a clogged bubbler. The bubbler can be removed, soaked in vinegar, cleaned with a small brush or other tool, and then reinstalled.

3. Pay attention to avoid scratching the faucet when cleaning

When cleaning the faucet, do not use any rubbing cleaner, cloth or paper towel; Do not use acid cleaners, polishing rubs or harsh cleaners or soaps.

Two, faucet daily maintenance

Usually available car wax spray to the faucet surface 3-5 minutes after wiping, can maintain the brightness of the faucet; It is best not to use dirty hands to touch directly, because the hand oil is easy to dip into the faucet surface, not easy to clean, affect the finish.

Three, the correct use of taps in daily life

The correct use of the faucet should be as far as possible light close light open, do not vigorously repeatedly rotate the faucet knob, should not be turned too tight. In addition, the faucet should try not to bump against hard objects. For the use of bathtub faucet, the showerhead metal hose should keep the natural stretch state, do not coil it on the faucet when not in use or not, pay attention to the hose and valve body joint do not form a dead Angle, so as not to break or damage the hose.