There are many reasons for the small fire of the wall-hanging stove, this situation is generally used for too long wall-hanging stove, a brand new wall-hanging stove is not this situation. So, how to control the fire size of the wall-hung stove? Take a look at the introduction provided by this site!
Wall-hung stove fire small what causes
1. The water pressure is too low, the filter is clogged
Sometimes the water level at home is too low, or the wall-hung stove filter is blocked by impurities and other reasons will cause a small wall-hung stove to flee out. When this problem occurs, you should first check the water pressure (the normal value of 1 ~ 1.5bar), and properly adjust the water pressure. Then take off the filter for cleaning, and restart the wall-hung stove to try.
2. Ignition electrode carbon build-up
Start the wall-hung stove needs ignition electrode and induction electrode. Many users are concerned about the use, but long-term neglect of the maintenance and maintenance of the fireplace, resulting in the ignition electrode and induction electrode carbon buildup, affecting the fireplace. Encounter this problem to contact a professional after-sales service center or product service provider, professional cleaning and maintenance of the wall-hung boiler.
3. Gas piping system clogging
Clogged gas piping system and improper ventilation can also lead to a small fire, try to open the gas stove and try again. If it still does not work, check whether the gas meter is out of gas, the gas volume is not enough, the valve is not open, etc. You can try to recharge the gas meter first. Open the gas valve again and replace the gas meter battery to try (best operated by professionals).
How to control the size of the wall-hung stove fire
1. connect the u-shaped pressure gauge to the pressure measuring port of the gas valve of the wall-hung stove, turn the faucet to the hot water side and turn the faucet to the maximum. Long press the setting button under the burning status of the wall-hung stove, the screen will show the heating fire and then its value.
2. According to the value on the manometer, turn the hot water temperature adjustment knob and adjust it to the desired value. Press the set button or do not operate for 20 seconds. 3.
3. Press the “Set” key to complete the setting of each parameter value. 4.
4. Under certain parameters, observe the u-type pressure gauge and rotate the hot water temperature knob to the desired value. 5.
5. stop and start again, observe the ratio of boiler ignition and fire size, whether there is a burst of combustion or flameout phenomenon. 6.
6. restore the machine, leak detection.
What are the brands of wall-hung boilers
1. Rinnai wall-hung boilers
This brand is a traditional water heater manufacturer with a long brand history. Later we began to produce wall-hung furnaces, but mainly traditional wall-hung furnaces. Rinnai wall-hanging furnace using micro-flame technology, equipped with automatic water adjustment device, more accurate temperature control. 2.
2. Fiston wall-hung
Fiston is a well-known brand of fireplace, has been focusing on fireplace products for many years. The brand is a set of product development, design, production, sales and service in one comprehensive brand. The company’s positioning is safe heating, providing heating solutions for countless families. Committed to creating environmentally friendly and comfortable home environment for the majority of consumers.
3. Rhema wall-hung boilers
Rima wall-hung boilers was established in 2006, the company has more than 20,000 square meters of production base, more than 300 employees. So far, the company has become a professional manufacturer of wall-hung boilers, production technology in the same industry among the top.
4. Wanjiale wall-hanging stove
Wanjiale is a well-known Chinese home appliance brand with a certain brand history. This brand wall-hung stove adopts three-point temperature control, which can adjust the water temperature and gas consumption at any time, and the energy-saving effect is more prominent.
