Acceptance of paint construction must not be neglected, because paint construction is the face of the entire home improvement project, the construction effect of the important new self-evident. So for the majority of households, how to carry out the acceptance of wall paint? What are the standards and methods of acceptance of wall paint? So now let us take you to further understand the acceptance of wall paint standards and methods.
Acceptance of the appearance of wall paint
The appearance of the wall paint directly affects the appearance of the entire home, so when conducting the acceptance, the owner must be careful to ensure that there are no problems with the appearance part.
When conducting the wall paint appearance inspection, we mainly look at whether the color is even, whether there is any color difference, whether there is cracking, falling powder, translucent bottom, leakage of brush and other conditions exist on the wall.
When the wall paint coating is dry, we can use the method of visual inspection and hand feeling under natural light to accept: stand at 1.5m from the wall and check to see if there are sand eyes, color bite, drops, color difference, bottom penetration, etc.. You can also keep the light bulb and the wall at a distance of 10cm and probe along the wall to check.
To ensure that the wall paint is free of powder, waves, leakage of brush, etc.; no significant sand eyes, drops, lumps, spatter; clean doors, windows and lamps, furniture, etc., no traces of paint.
Acceptance of flatness of wall paint
It is also very important to check the flatness of wall paint. The acceptance of wall flatness mainly checks the deviation of wall corners and vertical flatness of walls.
Wall angle deviation check: use multi-functional inside and outside right angle detection ruler can detect the deviation of the right angle of the wall inside and outside (yin and yang). When using, push down to open the angle pointer box, when the pointer is in the position of zero, the right angle is 90 degrees, and its deviation value is read straight, each frame is 1mm. the general deviation value of the wall surface with ordinary painted wall is 4mm.
Wall verticality level check: when testing with vertical testing ruler, the left side of the testing ruler is close to the measured surface, observe the pointer, and the scale referred to is the deviation value. Wall paint wall verticality deviation value is generally 5 mm, horizontal deviation value is 4 mm.
If you want to know more information about the standards and methods of acceptance of wall paint, please pay more attention to Fuwu home network, Fuwu home network will provide you with more complete, more detailed and updated information.
