First place, composite solid wood, moisture-proof board, solid wood paint-free board: moisture-proof, environmental protection, and cost-effective. National cabinet products have experienced more than ten years of development, more than ten years of experience enough to determine the wardrobe with moisture-proof board is the only choice! The moisture-proof board of the cabinet can be used in the heavy humid environment, which shows its high quality. As the surface of the plate is more crisp, so the production equipment requirements are higher. The wall of the new house is decorated and painted, and there will be a small amount of water on the wall. After the installation of the whole wardrobe, it can not be ventilated, and the back part of the wardrobe needs a better moisture-proof plate. Moisture-proof board soaked in water, because of wood long fiber, coupled with green moisture-proof agent, soaking expansion to a certain extent is no longer expanded, so most brand cabinets with moisture-proof board as the main material of the cabinet, there is a certain reason.
Second, regular manufacturers produce particleboard and MDF: The particleboard produced by the same material is more environmentally friendly than MDF. In fact, the truth is simple: the molding wood, no glue, environmental protection must not say. If cut into 1 piece and 5 pieces of glue water is not the same, the less glue the more environmentally friendly. Medium fiber board, also known as density board, is made of wood powder molding, flatness is better, more suitable for carving and milling, molding, usually do modeling door, such as paint, molding (blister). And medium fiber board material is softer, edge sealing is not easy to burst phenomenon, easier to process, so many small factories use medium size. From the point of view of moisture-proof performance, the moisture-proof property of particleboard is much worse than that of moisture-proof board. There is less green core moisture-proof agent. If it is in a humid environment for a long time, the wood is easy to mold and decay. The MDF is made of wood flour. When the MDF is soaked in water, it expands like a cake.
Third, low cost production of particleboard in small factories: most small manufacturers consider the cost, generally use particleboard (that is, solid wood particle board), the use of ordinary glue, the cost is the lowest among the three materials.
Fourth, ecological board: (refers to the ecological board produced by small workshops) large core board or sandwich board plus double-sided paste polyurethane surface! Quality: sandwich board (commonly known as woodworking board, woodworking board) is a solid wood core of plywood, it will be cut into strips, spliced into a core, veneer material processing, the force of the whole board from the thin two layers of veneer, the middle of the wood block splicing and, the base material basic no force, it is easy to fracture and deformation. Most of this board is made of fir wood one or two years old. As long as fingers can pick the wood, the nail holding force is several times lower than the national standard.
