In terms of the safety factor of washbasin, although most of them passed the load and stress resistance test, they can suffer about 110 kg of weight pressure.
Wash basin size
The size of the wash basin is a major abnormal parameter. It is rare that for the basin and the hanging basin, it is necessary to understand the clear size of the basin when purchasing, otherwise the size is different, and it can not be installed on the bathroom cabinet; As for the basin, its size is usually not too important, as long as it is not too outrageous, can be accepted. The following are several commonly used under basin or hanging basin sizes:
1, (length * width * height, unit: mm) 500*430*450: the size of this basin is usually the same as the common size of hanging basin, rare suitable for modern small household use, for saving space has a great effect.
2. (Length * width * height, unit: mm) 610*470*65: This basin size is the common size of ultra-thin basin under the sanitary ware market in recent years. The products produced by this basin size are as usual with fashionable shape design, which is the favorite of modern young people.
3, (length * width * height, unit: mm) 600*450*185: This is the common size design of the traditional under the basin, although the modern basin design is much more novel than the traditional, but many features including the size of the basin are continue to come from the traditional basin.
Of course, the above three sizes are the most commonly used size of the basin with three different installation methods. In addition, there are many other basin sizes, such as: 608*519*202mm, 607*409*213mm, 711*483*200mm, 627*491*200mm and other basin sizes are more used on the market. In addition, there are many basin size differences, but their size difference is not large, which is now a big feature of the market basin.
Washbasin installation mode
Installing a washbasin in the bathroom at home is not a simple thing. How should it be operated? Here’s a lesson for everyone.
Firstly, the water supply and drainage lines have been reserved before installation, and the steel support for the washbasin table has been installed. Then, the decoration unit should finish polishing the mesa hole according to the mesa cutting drawing in the basin packing box, and accurately cut the faucet mounting hole according to the installed faucet and mesa size. Next, temporarily put the wash basin into the open table mounting port, check the gap, and make a mark. Finally, after checking and verifying, put the wash basin flat, on the edge of the wash basin mouth coated with silicone sealing material, put the wash basin carefully into the table, aiming at the mounting hole, with the previous mark phase calibration and upward pressure, and use the adjacent parts of the wash basin and table attached by the manufacturer, the wash basin and table carefully adjacent.
Another point is space resolution form. The washbasin is roughly divided into self-reliant and desktop two kinds. Self-reliant elegant shape, small footprint, and easy maintenance, suitable for small space toilet. However, it needs to be equipped with a mirror or washstand, so that the space above the pool can put some toiletries and cosmetics. A desk sink should take up at least the space of a small desk. It can be put on the table washing utensils, the following cabinet can also put debris. If the bathroom area is not large, you can consider installing a triangular wash pool in the corner, and a triangular debris rack can be hung above the pool to store washing supplies.
How to choose a wash basin
The brand of wash basin on the market can be said to be mixed, we are not careful may buy poor quality wash basin. So how do we buy suitable for their own, and good quality wash basin?
1, should buy through the national safety testing, commodity hone Bureau positive symbol certification products, for product production management is more rigorous, quality assurance and credit outstanding brand.
2. It is advisable to choose a basin with table top or support.
3. It is necessary to pay attention to whether there are installation instructions and operation instructions.
4, the product of metal accessories (such as screws, nuts and brackets, etc.), must use the embroider steel.
In terms of the safety factor of washbasin, although most of them passed the load and stress resistance test, they can suffer about 110 kg of weight pressure. After reading the product in detail, the use of washbasin should also pay attention to the following points:
1. Do not impact, knock, step, pull or press by gravity.
2. Please do not place glass or porcelain bottles above the basin to avoid falling and damage.
3. Stop stepping out of the bathtub by leaning on the basin.
4. Don’t let children play or climb in the bathroom.
5, the bathroom is dry and wet, and the bathtub is equipped with a safe handrail or a sliding pad.
6, regularly check whether the screw bolt is embroidered or loose.
7, usually cleaning, or in case of an earthquake, should check the solid position and the outside of the basin cracks, if there is, should be replaced.
