The water heater is a relatively commonly used household appliance in daily life. It is mainly a tool for providing hot water. It heats the water and uses some natural gas gas or can become a kind of heating for the water. It provides hot water for bathing. The installation height of the water heater in daily life is also the installation height of the water heater that needs to be paid attention to. The most suitable water heater must be installed in a well-ventilated room.
After the connection is made, a tightness test must be carried out. You can first pass the water to the water heater, and then the water flow is normal, then check to see if the water heater is leaking. The installation height of the water heater must be paid attention to colleagues. The water pipe of the gas pipe of the water heater should not be too long.
The installation height of the water heater should be at the level of the fire viewing hole and the height of the human eye. The water heater should not be installed above the furniture. When installing the water heater at the same time, the following points should be paid special attention to:
1. The water heater must be installed in a well-ventilated room, never in the bathroom or bedroom. A flue-type water heater must be installed with a flue.
2. Water inlet, water outlet, and air intake should be clearly distinguished. Air should not be connected to the water circuit, and water should not be connected to the air circuit.
3. After the connection is completed, a tightness test must be carried out. First, turn on the water heater. After the water flow is normal, close the outlet valve to check whether the water system is leaking. Then, close the water inlet valve, open the gas valve, carefully check all gas connections and pipes for air leaks with soap solution, and try the incineration system again after confirming that there is no air leak. According to the instructions in the “Instruction Manual”, after incineration, open the water inlet valve to check the operation of the water heater before putting it into use. If any problems are found, they should be solved in time.
4. Under normal circumstances, gas pipes should be connected with thick pipes, especially for artificial gas water heaters, and liquefied petroleum gas water heaters can be connected with thin pipes, but the inner diameter of 5-liter water heaters should not be less than 9mm. The inner diameter adjacent to the inlet of the artificial gas water heater should not be less than 10 mm for a 5-liter water heater, and not less than 12 mm for an 8-liter water heater.
5. The gas pipe adjacent to the gas water heater should not be too long. If it is connected with a hose, the gas pipe should not exceed 1.2 meters, and the water pipe should not exceed 3 meters. It should be well supported and secure to prevent twisting and breaking. The water heater should be resistant to high temperature and should be checked frequently to avoid water leakage.
6. The installation height of the water heater should be at the level of the fire viewing hole and the height of the human eye. The water heater should not be installed above the furniture.
The above is about the installation height of the water heater. It is most suitable for the light account to be at the same height as the human eye. The water heater must be installed in a well-ventilated room, and it must not be installed in the bathroom or bedroom. It must be tested for tightness. The water heater can be passed through the water first, and the installation height of the water heater must be adjusted. Note that the water pipe of the gas pipe of the water heater should not be too long.
