When decorating the bathroom, more and more people choose to install water-saving toilets, which are both beautiful and elegant, and can save water. But we still need to pay more attention when purchasing and installing. Below, I will introduce the precautions for purchasing water-saving toilets and the installation details of water-saving toilets.
Precautions for purchasing water-saving toilets
1. Look at the ceramic glaze
Water-saving toilets save water, but if the cleaning effect cannot be compared with ordinary toilets, then water-saving toilets are not very meaningful. How to see the cleaning effect? The most basic thing is to look at the ceramic glaze of the toilet. Generally, the enamel material of the product is good. If the firing temperature is high, the water absorption rate will be lower, and the surface is not easy to get dirty. Stains are easy to remove even with a little water.
2. Measuring the discharge diameter
To flush away the dirt with a small amount of water at one time, the toilet must first have a larger sewage discharge diameter, and observe whether the interior of the sewage pipe is also glazed. Before buying, you can put your hand into the sewage pipe to see if the inner wall of the pipe has a smooth glazed inner wall, and then measure whether the caliber is large enough. Consumers can put their whole hands into the toilet mouth, generally suitable and large enough, and the hands can be stretched freely.
3. Measure water quality
The quality of the water parts will directly affect the service life of the toilet. Therefore, before purchasing, you can press the button to listen to the sound of the flush button. If it can make a crisp sound, it means that the quality of the toilet water parts is better. . Secondly, observe the size of the water outlet valve of the water tank. Generally, it is better for the valve to reach a diameter of more than 7 cm, and the water outlet valve will determine the water outlet effect and flushing capacity of the water-saving toilet.
4. Feel the actual flushing ability
You can ask to experience the actual flushing capacity of the toilet on site. It would be even better if there is a trial device on site. According to national regulations, 100 floating resin balls should be placed in the toilet during the toilet test. A qualified toilet should have less than 15 balls left in one flush, and the less resin balls are left, It shows that the flushing effect of the toilet is better.
Water saving toilet installation details
1. The installation width of the reserved water-saving toilet is preferably not less than 0.75 meters. Nowadays, many domestically-made water-saving toilets on the market are of good quality and appearance. It can fully take into account the characteristics of the small size of the current domestic bathroom, and the volume is not large. In contrast, imported water-saving toilets are generally “wide and fat”. If you don’t have a special preference, please think again. Because the width of the toilet installation should be arranged as far as possible above 0.75 meters, which is convenient to use.
2. The height of the water seal at the bottom of the water-saving toilet is too low, which may cause the bathroom to return to smell and affect health. If it is too high, the water surface is easy to splash, so the manufacturer should adjust the water seal to a suitable position according to the height of individual needs. If the pit distance is not correct after buying the toilet, the decoration team will raise it up, make a water guide, and then make it waterproof; or buy a drainage converter to connect it. However, any change in abnormal installation will destroy the vacuum suction of the toilet, affecting the original sewage discharge speed and odor isolation effect. If the toilet and the drain hole you bought really don’t match, it’s best to ask the dealer to replace it with a suitable one.
3. The water-saving toilet cannot be installed in an environment below zero degrees Celsius, otherwise the water will freeze and expand to squeeze the ceramic body. Do not hit the ceramic with hard objects to prevent damage and water leakage. In order to keep the surface of the product clean, it should be cleaned with a nylon brush and a special detergent. It is strictly forbidden to use a steel brush and a strong organic solution, so as not to damage the glazed surface of the product and corrode the pipeline.
The above are the precautions for purchasing water-saving toilets and the installation details of water-saving toilets. Do you understand it?
