Bathroom waterproof decoration is a priority for people to carry out bathroom decoration, because bathroom waterproof decoration is the main content of bathroom decoration. If bathroom waterproof decoration is not in place, it will bring endless troubles in the future! Therefore, bathroom The status of waterproof decoration in bathroom decoration is very important! So now I will share with you the precautions for waterproof decoration of bathroom:
1. The pipeline budget cannot be saved. In the decoration process, most of the water and electricity pipelines are hidden. If the water and electricity are not well done, it is useless to decorate the house. If you find such or such problems after you move in, it will be a big trouble to rework. Therefore, when making a budget at the beginning, this part must not be saved, choose high-quality products from big brands, and conduct wiring regularly according to the basic regulations of home improvement.
2. Resurfacing the floor tiles to do the ground waterproofing
If you need to replace the original floor tiles of the bathroom, after chiseling the original floor tiles, you must first use cement mortar to level the ground, and then do waterproof treatment, so as to avoid the leakage of waterproof coating due to uneven thickness. Before doing waterproofing, be sure to clean the ground and apply polyurethane waterproofing paint 2 to 3 times repeatedly.
Experience: The joints between the wall and the ground and the ground joints of the pipes between the upper and lower water are the most prone to problems. We must supervise the workers to deal with these edges and corners, and the waterproof coating must be applied in place. The decoration team is required to make cement mulch for the upper and lower water pipes of the kitchen and bathroom, and apply a polyurethane waterproof coating of 10 to 20 cm upward from the ground, and then redo the polyurethane waterproofing on the ground, and add the original waterproof layer to form a composite waterproof layer. to enhance water resistance.
3. Be sure to do wall waterproofing
When the bathroom is bathed, the water will splash on the adjacent wall. If there is no protection of the waterproof layer, the adjacent wall and the opposite corner wall are prone to moisture and mildew. So be sure to do a good job of waterproofing the wall before laying the wall tiles. In general waterproof treatment, the wall should be waterproofed at a height of 30 cm, but for non-load-bearing light body walls, the entire wall should be waterproofed, at least 1.8 meters high.
Experience: The waterproof wall adjacent to the shower should also be 1.8 meters high. If a bathtub is used, the height of the waterproof coating on the wall adjacent to the bathtub should also be higher than the upper edge of the bathtub.
