In daily life, many people have encountered the toilet leakage situation, once this happens, the impact on our normal life is very big.
So, what about a leaking toilet? About this problem, today we will answer it in detail.
Toilet leakage problem, according to the location of the different, our response measures are not the same.
First, waterproof layer leakage
If the waterproof layer is leaking, the original tiles need to be removed first, and do a good job of cleaning the grassroots. Cement and mortar after a reasonable proportion, further waterproof treatment.
Generally speaking, the height of the wall of waterproof treatment is about 30cm. After such treatment, it can be more effective to prevent water leakage.
Two, toilet waterproof layer leakage
If only the waterproof layer of the toilet is leaking, it is relatively simple to deal with.
At this time, you do not need to get rid of the tile, just need to use a simple permeable waterproof agent on the surface of the toilet to do a waterproof. This keeps the water from going underground, straight out of the channel.
Three, the upper and lower water pipes leak
The water leakage of the upper and lower pipes is more complex. If the water pipes are underground, we also need to plane bricks to deal with them, but it does not mean that the whole toilet should be redecorated.
If there is a problem with the water inlet pipe, we can change it into open pipe, and discard the leaking pipe. If the sewer pipe is leaking, the most important thing is to confirm the location of the leakage, and then according to the situation can be partially planed brick, rather than all planed off.
Four, the ceiling waterproof
The bathroom is a humid environment in the home, which is often surrounded by water vapor.
Therefore, regarding the leakage maintenance problem of the toilet, we can consider using pvc gusset plate with better waterproof performance.
By enhancing the moisture-proof performance of the suspended ceiling of the toilet, it is also of great help for the leakage of the whole toilet.
Five, underground water pipe leakage
This kind of leakage situation, is often the first to put aside the brick on the ground, to find the water pipe joint, the joint seal for treatment.
If the problem is the pipe itself, the pipe must be replaced. After the need to bury the water pipe again, and repair the waterproof layer and floor tile within the scope of maintenance.
Toilet leakage how to do this problem, according to different leakage situation, we have given the corresponding solution. Last but not least, it is necessary to carry out waterproof test after maintenance.
After the sewer pipe and the floor drain are sealed, water is released in the toilet and the water level is recorded. If the water level does not drop significantly after 24 hours, the water leakage problem should have been solved.+.
