Hear disassembly cleaning many people may feel troublesome, in fact, the operation is very simple, it does not want you to completely disassemble the shower head into a piece, the most important is to let you clean the shower head.
The shower head will be blocked after long-term use for a period of time, this is very natural, this does not mean that the shower head is broken, do not worry, do not buy a new, this is due to the long-term discharge of water after the production of scale, you only need to disassemble the shower head can be cleaned.
Hear disassembly cleaning many people may feel troublesome, in fact, the operation is very simple, it does not want you to completely disassemble the shower head into a piece, the most important is to let you clean the shower head.
The main raw material for cleaning the shower head is white vinegar, which is also a kind of material in the family. After we remove the shower, put it in a small basin filled with white vinegar and soak it for about two hours. After soaking, scrub with a toothbrush and then clean it with water. If there are any hard water deposits, scrub with lemon slices.
Cleaning the shower head should be careful not to use strong acid (preferably white vinegar), so as not to cause corrosion on the surface of the shower. In order to ensure that the shower head is not blocked, we had better clean the shower head every half a year or less, so that you will not worry about the sudden blockage of the shower head when you take a bath, so as to affect your bath mood.
In order to ensure the service life of the shower head, we had better make it not directly below the shower head when installing, and the distance from the shower head had better be more than 60cm, and often wipe the surface of the shower head with a soft cloth stick a little flour, so that it is still as new.
Shower head clogged cleaning tips
vinegarize
If your shower head blocked for a long time, and is a large number of holes are blocked. So using the needle to Pierce one by one obviously doesn’t show much. In this case, it is recommended that you use acidizing dust to solve the problem of clogged shower sprinkles. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head is soaked. After about ten minutes of vinegar, you can remove the scale in the shower head.
needling
If some of the holes in your shower are blocked, then pour water first and see that the holes are blocked at the end. Then you have to turn on the shower head and see that it looks like a shower head with a lot of holes in it. This is where the water comes out. So we first prepare a needle, and then use the needle to Pierce the impurities in the hole without water until there is no impurities in the hole. This method is the most direct, but be careful to sprinkle the hole to puncture Oh.
Use lubricant
If the blockage is serious because of metal rust in the shower head, then use WD-40 rust removal and antirust lubricant. This rust removal lubricant can have a very good affinity and permeability with metals. You can separate the rust layer from the metal layer. The contact surface between the rusty part and the metal, leaving a protective film. Let the shower never rust to death. If your home shower is not made of stainless steel, you may use this method.
