HOMENews

What if the shower head is blocked? Nozzle clogging washing tips

What if the shower head is blocked? Nozzle clogging washing tips

2023-03-16 11:03:30

Many people may think of disassembly as a poor, simple operation. It does not require you to completely disassemble the shower head into pieces. The main thing is for you to wash the shower head.

After durable use of the shower head for a period of time, there will be blockage signs, this is very natural, this does not mean that the shower head is broken, do not need to melancholy, do not need to buy a new, this is due to the occurrence of scale after durable discharge of water, you only need to disassembly the shower head for washing.

Many people may think of disassembly as a poor, simple operation. It does not require you to completely disassemble the shower head into pieces. The main thing is for you to wash the shower head.

The main material of the shower head is white vinegar, which is also a kind of material in the family, we will take down the shower, put it in a small basin with white vinegar soaking for about two hours, after soaking with a toothbrush, and then wash clean with water; If there are any hard water deposits, scrub with lemon slices.

Washing showerhead is rare attention can not use strong acid (preferably use white vinegar), so as not to cause erosion on the outside of the shower. In order to ensure that the shower head is not blocked, we had better wash the shower head every half a year or less, so that you will not be depressed when the shower head suddenly blocked, so that it will affect your bath mood.

In order to ensure the service life of the shower head, we had better make it not in the bath bar under the installation, and the distance from the bath bar is best more than 60cm, and often use a soft cloth stick a little flour to wipe the outside of the shower, so that it is still as new.

Tips for clogging the shower head

vinegarize

If your shower head blocked for a long time, and is a large number of holes are blocked. So using the needle to Pierce one by one obviously doesn’t show much. In this case, it is recommended that you use acid dust to solve the problem of clogged shower sprinkles. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head is soaked. Maybe after ten minutes of vinegar, you can remove the scale in the shower head.

needling

If the sprinkler in your home is blocked, then let the water out first and see that the holes are blocked at the end. Then you have to turn on the shower head and see that the shower head has an unusually large number of holes. This is where the water comes out. So we first prepare a needle, and then use the needle to Pierce the impurities in the hole until there is no impurities in the hole. This way is the most direct, but be careful to sprinkle the hole to puncture Oh.

Use lubricant

If the metal rust of the shower head leads to an unusually serious blockage, then use WD-40 rust removal and antirust lubricant. This rust removal lubricant can have exceptionally good affinity and permeability with metals. You can scatter layers of rust and metal. Makes rusty sections and metal contact surfaces, and leaves a precious film. Let the shower never rust to death. If your home shower is not made of stainless steel, it may be used in this way.