The sink is an essential part of our kitchen. The sink is mainly used for cleaning, and now most families choose double sinks, because the double sinks are large and easy to clean. It is indeed a troublesome thing to install a double sink downpipe, and many owners are not very clear about it. Let’s take a closer look at how to install the sewer pipe of the double sink? What problems should be paid attention to when installing the double sink?
How to install the downpipe of double sink?
1. To install the water inlet pipe of the faucet, connect one end of the water inlet pipe installed on the faucet to the water inlet switch. When installing, pay attention to the firmness of the connection. At the same time, pay attention to a detail, that is, the position of the hot and cold water pipes. Get it wrong.
2. Install the sewer pipe of the overflow hole. The overflow hole is a protective hole to prevent the sink from overflowing. Therefore, when installing the sewer pipe of the overflow hole, pay attention to the tightness of the connection between it and the tank body, and ensure that the sewer pipe of the overflow hole It does not leak water itself.
3. Install the downpipe of the filter basket. When installing the downpipe under the filter basket, pay attention to the connection between the downpipe and the tank. It must be firm and sealed.
4. Install the overall drainage pipe. Usually people will buy a sink with two filter baskets, but the distance between the two downpipes is close. When installing, the workers will cut the matching drainage pipe according to the actual situation. At this time, pay attention to the tightness between each interface, and common water leakage problems occur at these joints.
5. Install the hanging piece to reinforce the tank body. After the sink is placed on the table, it is necessary to install the supporting hanging piece between the tank body and the table to install the sink firmly to avoid small gaps that cause the tank body to shake from side to side.
Most of the current sinks are not the previous self-made cement sinks, and many of them have been replaced by stainless steel sinks.
What problems should be paid attention to in the installation of double sinks?
1. It is recommended that the sink should be installed a few days before the end of the decoration, so as not to be improperly used by the decoration workers after installation and cause damage. Pouring chemicals such as paint into the sink will cause damage to the surface of the sink.
2. Open the packing box, take out the sink body and drainage components, and check whether the accessories are correct and complete.
3. After taking out the sink, handle it with care.
4. According to the hole template attached in the packing box, make holes on the countertop of the cooking table
5. Check whether the sound-absorbing block is degummed, and if so, please reattach it.
6. The maximum operating pressure of the faucet is 7.5Kg/cm2, and the water temperature is not greater than 90°C.
7. When the faucet is taken out of the box, check whether the spare parts are complete. Check whether there are cracks in each part of the faucet, and whether the sealing rings at both ends of the connecting pipe are missing, misplaced, damaged, etc., so as to avoid water leakage after installation.
The above article introduced to you how to install the sewer pipe of the double sink? What problems should be paid attention to in the installation of the double sink? I believe everyone should understand clearly by now. The editor needs to remind everyone that the installation of double sinks is not as simple as imagined, and it needs to be constructed according to strict requirements. The editor believes that if you are not a professional, it is best not to install it yourself, so as to avoid any accidents during the installation process.
