1, the hardness of the glue:
502 glue after drying is unusually hard, this feature is the advantage is also a defect, the advantage is that it can be very good adhesion of harder objects, but some flexibility control is often not durable effect, that is to say, the first moment of adhesion is very good, after a period of time on the glue. Exercise this feature, when your two fingers are stuck together, forcefully rub the glue between the two fingers, rubbing the way is really random, mainly to let the glue loose. Rub for a while to test whether you can remove the two fingers, if not, continue to rub, within half an hour can solve the problem.
2. With blisters:
This method is simple, that is, when the glue has just dropped on the hand has not dried, quickly put your finger into the cold water, soak for a few minutes, you can see that the glue has become a solid, you can easily take the glue off the hand. If the glue has dried in the hand, then you will not use water again, so the timing must be better.
3, natural shedding method:
If your hand is stuck to a piece of paper or other small equipment, do not worry, if it is not the same as your normal, you let the glue stay in the hand for a day, as usual within two days can automatically fall off, this way is such as, do not be anxious.
4. Ablation method:
There is no way to completely melt 502, can only be slightly softened, such as insulation oil can play a softening role, after softening quickly rub off. Some people say to use acetone, which is highly toxic, not easy to use. If you don’t have insulation oil, you can use gasoline, but you can only use cooking oil to try (not tested do not know whether it is OK).
5, the use of insulating oil:
Use the lid to pour some insulation oil in the transformer, and then apply it to the glue area, the cured 502 glue will soon become soft, and then you can rub off.
Ways to prevent 502 sticking hands:
1, if you often use 502 things, in order to prevent glue sticking to your hands, in advance of the application of flour or foundation and other powdered particles, or a little soil on the ground, glue drops on the hand can only stick to the hand of the powder substance, the hand has nothing. The best treatment is to apply some hand cream to your hands beforehand.
2, with cotton gloves: gloves can prevent glue drops on the hand, but not all gloves can play a precious role, if the gloves are rubber, plastic, glue will make the gloves melt, release heat, may burn your hands. So gloves should be made of cotton gloves.
3, wet fingers: Another simple way is to sprinkle water on the hand, the glue meets the water will quickly become solid, basically can not touch your skin and can not stick to the hand.
