What should I do if the shower head at home is blocked?
1. Disposal facilities for blocked showers
1. With acupuncture
If only part of the small holes of the shower are blocked, then turn on the water first and then use a needle to pierce the impurities in the small holes without water, and it will be solved!
2. Soak with vinegar
If a large number of holes in the shower are blocked, it is not appropriate to use a needle to pierce them one by one. It is recommended that you prepare some white vinegar, pour the vinegar into the basin so that the shower head can be submerged, soak for ten minutes, and then turn on the flood water to wash out the scale and impurities, and the shower will work.
3. Use rust remover
If the metal of the shower head is rusted and clogged, it is recommended to use WD-40 rust remover. It has good permeability to remove rust. After the shower is turned on, put more water to flush it. WD-40 is not good for people.
4. Wipe with a towel
It is necessary to form a good habit of maintaining the shower head in normal times. After each bath, shake the shower head, and then use a towel to clean the shower outlet. For the outlet hole of the rubber material, rub it with your fingers.
5. Precautions for shower cleaning
a. Do not use strong acid when removing scale, so as not to corrode the outside of the shower.
b. Do not wipe the outside of the shower with hard objects such as steel wool, so as not to scratch the outside of the faucet.
c. Do not forcibly disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.
2. How to choose a shower head?
1. A well-designed shower can ensure that the amount of water distributed by each nozzle hole is basically the same, so you must see the water when choosing a shower. The water-saving function is the key point to consider when purchasing a shower. Some showers use a steel ball valve core and are equipped with an adjustable hot water controller, which can adjust the inflow of hot water into the mixing tank, so that hot water can flow out quickly and accurately. This kind of shower head with reasonable design saves 50% water than ordinary shower head.
2. When selecting, let the shower head tilt to discharge water. If the water discharge from the top nozzle hole is obviously small or not at all, it means that the internal design of the shower head is very general. Even if there are various water discharge methods such as lasing and jetting, users may not The pleasant experience of not getting a response.
3. Secondly, look at the nozzle, and pay attention to whether the shower is easy to clean. The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. After a long time of use, the shower will inevitably have scale deposits. If it cannot be cleaned, some spray holes may be blocked. For the clogging of the water outlet, the well-designed shower nozzles often protrude outside for easy cleaning, or the nozzles are made of silica gel, and the scale deposited on the nozzles can be wiped off with a rag or hand during cleaning. Some showers are also equipped with the function of automatically removing scale, so you can ask more about this when purchasing showers.
4. Look at the coating and valve core. Generally speaking, the brighter and more delicate the surface of the shower, the better the coating process. A good spool is made of ceramics with extremely high hardness, which is smooth and wear-resistant, and prevents leakage. Consumers must try to twist the switch by themselves. If the hand feel is poor, it is best not to buy this kind of shower.
5. Finally, shower accessories will directly affect the comfort of its use, and special attention is also required. For example, whether the water pipe and the lifting rod are flexible, what is the bending resistance of the shower hose and the steel wire, whether there is an anti-twisting ball bearing near the shower, whether there is a rotation controller on the lifting rod, etc.
