Many people may think it is troublesome when they hear disassembly and cleaning. In fact, the operation is very simple. It does not require you to completely disassemble the shower head into pieces, but the most important thing is to let you clean the shower head.
What should I do if the shower head is blocked? Cleaning Tips for Clogged Nozzles
What to do if the shower head is blocked
It is natural that the shower head will be clogged after being used for a period of time. This does not mean that the shower head is broken. Don’t worry about it. You don’t need to buy a new one at all. , you only need to disassemble and clean the shower head.
Many people may think it is troublesome when they hear disassembly and cleaning. In fact, the operation is very simple. It does not require you to completely disassemble the shower head into pieces, but the most important thing is to let you clean the shower head.
The most important raw material for cleaning the shower head is white vinegar, which is also a kind of raw material in the family. After we remove the shower head, put it in a small basin filled with white vinegar and soak it for about two hours. After soaking, scrub it with a toothbrush. Then rinse with clean water; if there is hard water sediment, scrub with lemon slices.
When cleaning the shower head, pay special attention not to use strong acid (white vinegar is best), so as not to corrode the surface of the shower. In order to ensure that the nozzle is not clogged, it is best to clean the shower head every six months or less, so that you no longer worry that the nozzle will be blocked suddenly during bathing, which will affect your bathing mood.
In order to ensure the service life of the shower head, it is best not to install it directly under the Yuba, and it is better to be more than 60cm away from the Yuba, and often use a soft cloth to stick a little flour to wipe the outside of the shower to keep it as new.
Shower head clogged cleaning tips
Soak in vinegar
If the shower head of your home has been blocked for a long time, and a large number of holes are blocked. Then it is obviously not very obvious to use a needle to pierce one by one. In this case, it is recommended that you use acidification and dust removal to solve the problem of clogged shower head. You need to prepare some white vinegar. Pour the vinegar into the basin so that the shower head can be submerged. Maybe ten minutes after soaking in vinegar, the scale in the shower head can be removed.
with acupuncture
If some of the small holes of the shower in your home are blocked, then turn on the water first to see which holes are blocked. Then you have to turn on the shower head of the shower and see that this shower head has an unusually large number of holes in it like a shower head. This is where the water comes out. Then we first prepare a needle, and then use the needle to pierce the impurities in the small hole that has not been seen just now until there is no impurity in the hole. This method is the most direct, but be careful to puncture the shower hole.
with lubricant
If the metal of the shower head is rusted and the clogging is extremely serious, then use WD-40 rust and anti-rust lubricant. This rust removal lubricant has exceptionally good affinity and penetration to metals. The rust layer and the metal layer can be separated. Make the rusty part and the contact surface of the metal, and leave a protective film. Let the shower never rust in the future. If the shower in your home is not made of stainless steel, this method may be used.
