The shower head is a must in life. The gentle and fine water not only washes away the dirt on the body, but also brings relaxation and enjoyment to the whole body. However, in daily life, many people will find that after using the shower for a period of time, the water outlet is easily blocked, the water outlet is not so smooth, and the comfort of use is greatly reduced. Why is the shower clogged? How to clean the shower when it is clogged?
The reason for the blockage of the shower head may be that the shower head has been used for a long time, and the water outlet of the shower head itself is blocked by copper rust and iron rust; or because of water quality problems, although the city tap water has been filtered, there will still be a lot of impurities, and then it will be transported and stored through pipelines. Impurities are generated again, which in turn causes clogging of the outlet hole.
What to do if the shower is blocked: Clean the shower head
The tap water contains a small amount of sediment. During the long-term use of the shower, the sediment will accumulate over time, and it will gradually block the outlet hole of the shower head, and even sand and stones will accumulate inside the shower. To clean these sand and stones, the method is as follows:
1. Use a needle to poke open the blocked water outlet holes one by one.
2. Clean the inside of the shower: remove the water pipe head connected to the shower, rinse the shower with water from the faucet in reverse, then fill it with water, block the water inlet, shake it vigorously, and quickly release the dirty water, repeat this several times Yes, this method is suitable for cleaning all shower heads; if the shower head can be disassembled, it is very simple to clean the inside, just disassemble the shower head and rinse with tap water.
What to do if the shower is blocked: the way to clean the shower
1. Manual cleaning, soaking in white vinegar: remove the grille at the shower head or other parts that absorb scale, clean it with a brush, and then put it back in place. Some brands of showers are equipped with a special shower head opening tool when they are sold, which is convenient for consumers to use. Mineral deposits can be easily removed with white vinegar, so soak the shower head in a 50/50 solution of white vinegar and water for an hour.
2. Hand-wiping cleaning: The water outlet of this type of shower is designed with rubber particles. The rubber material is soft and comfortable to the touch, and it is not easy to scale. It is easy to clean. Just wipe the rubber particles lightly with your fingers to easily crush the scale ,pop up. This cleaning method makes good use of the characteristics of the material and is a popular cleaning method on the market today.
