What should I pay attention to when installing the shower? The following introduces the precautions for installing the shower, so you can learn about it!
1. Please pay attention to yourself and the safety of the product when disassembling the shower.
2. The filter gasket should not be used if the mesh is too large or too fine. If it is too large, it may not be able to filter impurities. If it is too fine, it may affect the water flow. The filter mesh size is preferably 40-60 mesh. (Small science: The so-called mesh number refers to the particle size or thickness of the material. The general definition refers to the number of meshes in the area of 1 inch*1 inch, that is, the number of meshes of the screen, and the material can pass through the mesh. The hole is defined as the number of mesh: for example, 200 mesh, that is, the material can pass through a screen with 200 meshes in 1 inch*1 inch.)
3. Do not use strong acid when removing scale, so as not to cause corrosion to the surface of the shower.
4. Do not forcibly disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.
5. The ambient temperature of the shower should not exceed 70 degrees Celsius. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the installation of the shower should be kept away from heat sources such as Yuba and other electrical appliances. The shower cannot be installed directly under the Yuba, and the distance should be more than 60CM.
The above introduces the precautions for installing the shower, I hope it will be helpful to everyone!
