Now people like to use smart products, so that the experience is generally better, but also to meet people’s different needs, such as smart toilet seats. Now the smart toilet seat can automatically heat, clean, dry and other functions, very complete, of which millet’s smart toilet seat is a lot of people will choose. So millet smart toilet cover how to disassemble it?
First, how to remove the Xiaomi smart toilet seat cover
1. Clean the toilet seat mounting hole.
2. Press the release button on the back of the smart toilet seat, gently lift the front of the toilet seat, and then pull it forward out of the fixing plate.
3. Place the fixing board of the smart toilet seat on the correct position of the toilet mounting hole.
4. Insert the screws fixing the cover into the appropriate mounting holes in the toilet.
5. Fix the tooth line and adjust it to the appropriate position.
6. Tighten the screws.
7. Place the smart cover parallel to the toilet, hold down the release button, and then slide it into the fixing plate to lock it.
Second, the smart toilet lid can not be unloaded how to do
Smart toilet seat cover has a card, to loosen the card. We can find two holes in the position where the toilet seat and toilet seat are removed, and the card is installed on these two holes. The smart toilet seat has a square slot at the bottom, which we need to secure with mounting plates. Use the slot to point at the card and gently push. Installation should be installed in place, after installation try to shake, if you do not shake indicates that the installation is good, if there is a little, but also push in.
Third, how to clean the smart toilet seat
1. When cleaning and maintaining the smart toilet seat, make sure to remove the power switch and ensure that the power indicator on the main operation part is off.
2. Please wipe with a soft cloth dampened with water. If the dirt is not removed in time, it will be difficult to clean. Please wipe with water frequently. In addition, wiping with water prevents static electricity, which attracts dust and causes the product to turn black and dirty. It is also possible to separate the body from the smart toilet lid to facilitate the cleaning of the part between the smart toilet lid and the body.
3. If the nozzle is dirty, please clean it with a small brush such as a toothbrush, taking care not to forcibly stretch or bend the nozzle. Remove the dust from the power plug regularly. Remove the power plug when cleaning and wipe it with a dry cloth.
