New house acceptance is very critical, as the future of the warm nest, owners must not be in the completion of the construction of the acceptance of the link oh lightly. So as a basic acceptance process, what parts are the acceptance focus? First of all, you need to check whether there are cracks on the walls, whether the floor is flat, etc. Next, come with me to learn more about it.
Warm bedroom effect picture
1, whether the floor is flat
Want to check whether the floor is flat, just need to use a long ruler (or with a horizontal special ruler), against the wall ground, check whether it is flat, while observing whether there are scratches cracks, whether the wall has a burst point (burst point: lime in the development of mature lime due to uneven mixing is not good, smeared on the wall will form a burst point, using an iron tool to hit the “burst point (When you hit the “popping point” with an iron, you will find a large area of loose, peeling and other quality problems.)
2、Whether the wall has cracks
Check whether the wall is flat at the same time, you also need to see whether the wall has cracks (four common cracks: strength cracks, settlement cracks, temperature cracks, deformation cracks), whether there is external leakage of wire mesh, rebar. If the above wall problems are found during the house inspection, you can finally help the developer to repair them after signing.
3、Whether the indoor stairs are defective
Mainly look at the flatness of the stairs, whether there are defects.
4、Doors and windows installation track is smooth
In terms of door and window inspection, the main thing is to check whether the track of the doors and windows is smooth. Especially the casement window pro, must pay attention to whether it can be closed tightly. Otherwise there will be wind into the room, especially in the cold north, then in winter you will be miserable. If these problems found when re-inspection, directly notify the developer, they will quickly repair, if you have signed, and then find the developer to deal with these problems. Then their efficiency is turtle speed.
The second aspect is in checking whether the glass of the doors and windows of the new house is broken. Whether there is deformation in the window frames. If any abnormalities are found, find the developer urgently to solve, this is a matter of great need for your attention, especially the doors and windows of each room should be carefully checked well to avoid unnecessary financial ruin.
5, whether the entry door is bumped and painted
Need to carefully check whether the entry door is bumped and painted, in the strict sense, the door body inside, outside, the top surface is necessary to paint. The door gap is not too large, the door open and close without special sound, the four sides of the door should be close to the door frame, the door lock side gap can not be too large, but also do not forget to try the lock, mainly to see whether the key is good, and whether the door lock is installed solid. Other very important point is that the door should have good sound insulation, as well as the degree of sealing.
Modern living room effect
6, balcony equipment without breakage
Acceptance of the balcony, the main thing is to see whether the balcony floor is flat and undamaged, followed by whether the balcony window equipment is intact.
7, the height of the floor can not be less than 2.8 meters
As the building building height regulations generally in 2.8 meters, the actual height can not be lower than 2.6 meters, the actual height of 3 meters can not be lower than 2.75 meters, but the residential floor height can not be lower than 2.8 meters.
8、Whether the water supply is complete
In checking who to pay attention to, mainly to see whether the room of each water pipe faucet has water supply, whether the supporting complete, (including the building in the pipe well in the tap).
Living room effect
9, drainage is normal
With the water supply, the remaining big problem is the solution to the drainage problem. Acceptance of the location of drainage is mainly in the basin, toilet, bathtub, and bathroom, kitchen, balcony floor drainage, etc. (should hear the sound of grunting and no water on the surface). Qualified ground should not be the presence of standing water, because the floor drain is the lowest place, but the rough room floor drain around the left a certain height of the later paving ground. Let the water flow as large and rapid as possible, to see the size of the water pressure and test the drainage speed.
10、Is the electrical consistent with the number of bought
The first thing to check in electrical is to check whether the amount of water and electricity in the electric card and water card is consistent with the quantity bought.
