The process of decoration is long and complex, so it is inevitable that there will be omissions, but for the owners who do not understand the decoration, they do not know what places are prone to omissions.
In this article, we will introduce the 7 omissions that are easy to appear in the decoration. When decorating, we must focus on these places to check.
7 Decoration easy to neglect places introduced:
1. Non-joint wall tile: non-joint wall tile will lead to the gap between the floor tile and the corner is too large, in addition, if the wall tile fails to press the floor tile, it will also lead to the gap at the junction of the wall tile. These situations are basically caused by the construction quality is not high.
Suggestion: Although this situation can be repaired later, but it will affect the appearance.
2. Private connection of wires: When wiring in the decoration, do not randomly connect.
Suggestion: An experienced electrician should be invited when the circuit is modified. The plastic sheathing line or other insulating conductor used in the wiring should be protected through pipes, and cannot be directly buried in the cement or lime coating layer.
3. Damaged wall bricks are not replaced: some wall bricks can obviously see small holes and damage, but the construction team is too troublesome to replace the new bricks in time.
Suggestion: The acceptance of wall bricks should be carefully, damaged wall bricks should be replaced in time, so as not to affect the overall beauty of the wall.
4. The construction site violates the construction safety regulations: some heavy objects are piled in one corner of the room, the ladder used for construction has not been fixed, and some construction personnel smoke while working on the construction site.
Suggestion: In order to protect the personal safety of the construction personnel, the ladder should be fastened with a safety rope, the ladder feet should be wrapped with anti-slip materials, and the construction site should do a good job of fire prevention.
5. The construction does not comply with the specifications: the gap between the door stone and the door frame exceeds the specifications, there is no joint between the wall bricks, and even there are wrong joints, the gap between the detection mouth of the ceiling is too large, the edge is not straight, the gap between the floor tile and the sliding door frame is too large, and the Angle of Yin and Yang is not vertical.
Suggestion: Construction should be carried out in strict accordance with industry norms. The owner shall ask professional personnel to assist in acceptance inspection. To avoid security risks.
6. Cutting corners: Installing TV cables without leaving enough length. The pass material was replaced with scraps. A series of jersey-working practices such as tile without joint treatment.
Suggestion: If the length of wire is not enough, it will affect the use of electrical equipment after moving in. If the pass is passed, it should be a whole sheet, not more than two pieces at most.
7. Uncivilized construction: some decoration garbage piled up or poured into the sewer, toilet and other places, easy to cause sewer blockage.
Suggestion: The site protection and cleaning work is very necessary when decorating. The site cleanliness of a construction team can also reflect the quality of the whole home decoration.
