Because of the extreme lack of decoration knowledge, new house decoration is a very challenging task for many homeowners. The decoration problems that emerged during the home improvement process have caused many homeowners a headache. As one of the most important sanitary ware in our bathroom, the bathtub is very comfortable for us to take a hot bath, but do you know how to maintain acrylic, solid wooden barrels, and jacuzzi bathtubs? Xiaobian introduces them here Bathtub maintenance knowledge, I hope it can help everyone to do a good job in bathtub maintenance knowledge.
1. 温和处理表面污渍
You can use a discarded soft-bristled toothbrush dipped in bleach to scrub the surface, which can not only remove stains, but also eliminate mold. For stains that are difficult to wipe, you can use half a lemon dipped in salt to scrub, or you can use a soft-bristled toothbrush to apply toothpaste with whitening function to scrub. Turpentine is also very useful at this time. For scale, the products used to clean the toilet on weekdays are very good. If you don’t like the pungent smell, you can also use lemon and white vinegar, which is a more natural method. Do not use detergents with fading properties, especially if the bathtub at home is colored. For mold and fungal disease-causing bacteria, rinse with bleach and peroxide and dry immediately.
Second, timely repair of scars
After the bathtub is installed, do not move it privately. If you need to move the location, you must contact a professional. Do not knock or hit the surface with hard objects, causing bruises or scratches. If the dark or scratched part of the acrylic bathtub needs to be repaired, it can be wiped vigorously with a clean rag mixed with a colorless automatic polishing solution, and then coated with a layer of colorless protective wax. Do not wax the foot landing area to prevent slipping.
3. Weekly cleaning
When cleaning the acrylic bathtub, use sponge or flannelette, do not use coarse cloth, scouring pad, do not use any cleaning agent containing granular objects, and it is best to avoid direct sunlight and contact with high-temperature cigarette butts. Mild cleaning agents (such as dishwashing liquid) can be used instead of abrasive cleaning agents.
Acrylic bathtubs can also be cleaned with glass water. Cast iron bathtubs should be rinsed thoroughly with clean water after each use and dried with a soft cloth. In case of stubborn stains, use a small amount of abrasive cleaner to clean. Clean the bottom non-slip surface with a soft nylon brush. Do not scrub with steel wool, wire brushes or abrasive sponges.
The jacuzzi system should be flushed more than twice a month. Adjust the nozzle clockwise to the fully closed position to prevent air leakage. Fill the bathtub with warm water to 2 inches above the highest nozzle, or leave the water in the bathtub after use. Add two tablespoons of low-foaming powdered automatic dish soap and a small amount of household bleach to the water. Turn the jacuzzi on for 5 to 10 minutes, then turn it off, drain the water, and rinse the tub surface with water. The bathtub is in a hot and humid state for a long time, and a lot of bacteria will grow. Sometimes after cleaning, the surface looks clean, but in fact there are still a lot of bacteria. It is recommended to wipe the surface of the bathtub with boiling water regularly, and do not use disinfectant water casually, because disinfectant water may not necessarily kill mold and fungi.
4. Dealing with pipeline blockage and disinfection
The pipes should be cleaned once or twice a week to remove the smell and prevent bacteria from growing. You can use products specially designed to clean the sewer, pour it into the sewer, and wash it after 5 minutes. Be careful not to use it in metal pipes. If the bathtub is blocked, you can close the drain valve first, and then put an appropriate amount of tap water in the bathtub; place a rubber suction device (for dredging the toilet) on the drain valve; while opening the drain valve, suffocate the basin or The overflow hole of the bathtub; then quickly suck up and down, suck out the dirt or hair, and clean it up in time. In the case of serious blockage, it can be repeated several times until it is cleared.
The bathtub is a relatively common bathroom product in our home life. Almost every household has a bathtub, but do you know what material the bathtub is made of? Is it cast iron, acrylic or solid wood? I will introduce you to the bathtub here. The material is good, I hope it can help everyone understand what material is good for the bathtub.
Features of cast iron bathtubs:
Due to the thickness of the bathtub wall, the cast iron bathtub has good thermal insulation performance, which is favored by some consumers who value thermal insulation performance very much. However, in fact, 90% of the heat loss of the bathtub is through the heat exchange and heat radiation between the water surface and the air when taking a bath. Dissipated, only 10% of the heat is lost through the cylinder; in addition, such as low noise of water injection, easy to clean, acid, alkali and chemical resistance, high gloss, etc., due to various characteristics shaped by the material, it is indispensable for bathtubs made of acrylic and other materials. Advantages beyond. Therefore, the price of a general cast iron bathtub is 2-3 times that of an acrylic bathtub. The installation procedure is the same as the built-in bathtub, except that the cast iron bathtub is much heavier, but it can be done almost once and for all, so it is still a good choice to buy a cast iron bathtub.
Features of cast iron bathtubs: Cast iron and enamel are extremely durable materials. Bathtubs made of it can usually be used for more than 50 years. Many cast iron bathtubs abroad are used from generation to generation. The surface of the cast iron bathtub has been treated with high-temperature glazing, smooth and flat, easy to clean. Cast iron bathtubs are 2-3 times more expensive than acrylic and steel bathtubs. This is also an important reason why it is difficult to popularize in the market.
The advantages of cast iron bathtub: smooth and smooth, warm color, anti-fouling, low noise of water injection, easy to clean, durable;
Disadvantages of cast iron bathtubs: the price is the highest, the color and shape are limited by the process, so the shape is relatively monotonous, and the color selection is relatively simple. , heavy weight, difficult to install and transport. Pay attention to the smoothness and flatness of the glaze when purchasing a cast iron bathtub.
Acrylic bathtub features:
The official name of the acrylic bathtub is glass fiber reinforced plastic bathtub. The surface material is methyl propyl methyl ester, the back is covered with glass fiber, and coated with special resin for reinforcement. The color of the acrylic bathtub is uniform, the surface is smooth, and there is no delamination and air bubbles.
The heat transfer of the acrylic bathtub is very slow, so the heat preservation effect is good. Even in the cold winter, the skin will not feel “cold” when it touches the surface of the acrylic bathtub. When the human body collides with the acrylic bathtub, it generally does not hurt the body, so it is a necessary material for making luxurious bathtubs.
Acrylic is a by-product extracted from deep-sea oil. Compared with cast iron and steel bathtubs, the cost of raw materials for making bathtubs is much lower, and the performance is very good, so it has price advantages and stronger market competitiveness.
Acrylic bathtubs have many advantages, but there are naturally disadvantages. The pressure resistance of acrylic bathtubs is relatively poor, so the surface is easily stained by some small hard objects, and it is easy to yellow and age after a long time of use. In terms of service life, acrylic bathtubs are far inferior to cast iron or steel bathtubs.
Solid wood bathtub features:
Solid wood bathtubs are often made of hard wood, high density, and good anti-corrosion properties, such as spruce, oak, pine, cedar, etc. The most common material for solid wood bathtubs on the market is cedar. In addition to giving people a refreshing feeling, the solid wood bathtub has the advantages of easy cleaning, no static electricity, and environmental protection and nature. After bathing, it can be cleaned with clean water, and daily maintenance is simpler. , avoid exposure to the sun.
