How to deal with electric kettle failure
1. Power but no heat
Power but not heating this is a common problem of electric kettle failure, if there is such a failure, it may be a problem at the link or the electric heat pipe, then as long as a new one is good. If the spring plate is deformed or the socket is broken, it will also lead to poor contact, which also needs to be replaced with a new one.
2. The indicator is off
The electric kettle has been plugged in, and the power supply is no problem, when boiling water, press the switch, the electric kettle indicator light is not bright. When encountering this situation, it is necessary to carefully check whether the metal reed is pressed to the contact rod of the switch, if it is pressed, it is necessary to pick up the electric kettle and bend it again. If it is not the problem, then it must be folded down and cleaned before use.
3. Keep the electricity running after the water is boiling
Sometimes when you boil water with an electric kettle, you will encounter the situation of constant electricity after the water is opened, which may be the failure of the connecting switch rod, or the temperature sensor is deformed. At this time, it is necessary to carefully observe whether there is dirt blocked under the switch connection rod, if it is cleaned up. If the temperature sensing tablet is deformed, it is necessary to bend the small tongue of the temperature sensing tablet.
4. There’s too much scale
If there is too much scale in the electric kettle, it is necessary to pour water and vinegar in accordance with the ratio of 2:1 into the electric kettle, then turn on the power to let it boil, wait until the liquid in the electric kettle cools and then pour it away, and then boil a pot of clean water.
How to use an electric kettle
1. First of all, remove the electric kettle from the base, then press the lid button, and pour water into the kettle after the lid is opened. It should be noted that the water quantity should not exceed the maximum water level.
2. After the electric kettle is filled with water, cover it, put it on the power base, and then press the power switch on the electric kettle, and start to boil water when the indicator light is on.
3. If the water in the electric kettle is boiled, it will automatically power off and the indicator light will be off. At this time, if you press the heat preservation button, the water begins to be in the heat preservation state, if you do not need heat preservation, directly press the heat preservation switch will stop the heat preservation, and the heat preservation indicator will be off.
4. After the water of the electric kettle is boiled, the kettle can be removed from the base, and the boiling water can be poured out until it is cool.
