1, ceiling: because the water between the bathroom is heavy, so, to choose those with waterproof, anti-corrosion, anti-rust characteristics of the material.
2, the ground: before paving the floor tile, be sure to do a good job of waterproof; After tile laying, it is necessary to ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is toward the floor drain; The ground must be closed after laying tile experiment, time to ensure at least 24 hours; When laying the floor tile, we should pay attention to the joint and alignment with the wall tile to ensure the whole sense of the bathroom, so as to avoid the impression of clutter in the vision.
3. Wall: the wall tiles should also be moisture-proof and waterproof, and the tiles should be smooth and aligned with the floor tiles to ensure the overall sense of the wall and the ground; If the outlet of the feed water pipeline is encountered, the cut of the tile should be small and appropriate to facilitate the flange cover on the feed water device to cover the cut, so that the appearance is complete.
4, doors and Windows: the bathroom is better with Windows, for ventilation; If there are no Windows, pay particular attention to the details of the door. In order to prevent the water between the bathroom overflow, the door boundary should be slightly higher than the inside of the bathroom; The gap between the bathroom door and the ground should be left a little larger to facilitate the return air; If it is sliding door, but also in the sliding door and bathroom tile between a layer of waterproof.
5, circuit laying: sanitary wire joints must hang tin, and have to wrap waterproof tape and insulation tape, to ensure safety; The wire body must be covered with flame retardant tube; All switches and sockets must have moisture-proof boxes, and the location also depends on the size and position of electrical appliances, to ensure that the use of convenient and reasonable.
6, waterway transformation: the sanitary water supply and drainage line is better not to make too much change, if you want to change, according to the specific situation, such as the washing machine model is different, the water position will be different.
7, sanitary ware installation: it is better to remember the distance between the water hole before decoration, and choose the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size, so as to avoid inappropriate size during decoration; The installation of toilet seat should first be sealed with clay, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet seat is blocked.
8. Ventilation: there must be an exhaust fan in the bathroom, and the exhaust fan must be equipped with a reverse gate to prevent the backflow of dirty air.
