After using the washbasin for a long time, oil stains and dirt are easy to accumulate. At this time, you can use oxalic acid to scrub the surface of the washbasin, wait for a minute and then rinse it with clean water, and the washbasin will become bright. This is due to the high acidity of oxalic acid, which is quite effective in removing oil stains, etc., but remember to wash it with water as soon as possible after using oxalic acid, so as not to be corroded by acidic substances on the surface of the object. If it cannot be improved, you can buy bottled safe bleach, pour it into the stained area of the washbasin, soak it for about 20 minutes, wash it with a towel or sponge, and then wipe it with water, but never use a scouring pad or sand Chalk the surface as this will scratch the surface of the basin and make it tarnished.
Home Decoration Raiders Encyclopedia Teach you the daily maintenance of sanitary ware as clean as new (pictures from the Internet)
The above method of washing basins can also be applied to other ceramic sanitary ware. In addition, in order to protect ceramic sanitary ware, the following points should be paid attention to:
Do not flush information paper, paper changing pads, sanitary napkins and other items that are easy to clog into the toilet;
To prevent breakage and water leakage, do not hit the ceramic;
When it is blocked, please immediately remove it with a skin suction device;
Cannot be used and stored in water environment below 0℃;
In order to prevent the expansion of cement from bursting the bottom of the toilet, glass glue must be used for installation;
If your water already has a return water bend, it is recommended that you use a flush-down product, and it is forbidden to use a siphon product;
When installing the squatting pan, it is recommended to separate the product installation surface from the floor with a thin layer of asphalt;
When installing the basin, it is recommended to use glass glue, and epoxy is prohibited.
If there are metal scratches, they can be washed off by chemical reaction with dilute acid without damaging the glaze.
When installing the toilet, if the floor is too thin, it is recommended to fix it directly with silicone instead of expansion bolts.
If you choose a cabinet basin, especially a hanging cabinet basin, it is recommended that you do not fix the cabinet directly, but fix the cabinet together with the ceramic washbasin, which is safer.
Summary: At present, many users use domestic water to flush the toilet. The sewage from washing clothes is alkaline. When it passes through the toilet tank, it is easy to damage the water parts, and the oily water is also easy to corrode the parts and stain the ceramic body. The water used to flush the toilet with the water used to wash the dishes and chopsticks, but it has little to do with pouring it directly into the toilet without passing through the water tank.
