It’s kind of disgusting to think that when we didn’t have toilets, we had to go to cesspool. Have to admit, the appearance of the toilet to our life has brought great convenience, is our Gospel. With the progress of science and technology and the improvement of people’s living quality, there are more and more types of toilets. The following Xiaobian introduces the split toilet, it is how to install?
Split Toilet Installation – The first step of toilet installation
Check. For the toilet to maintain a good use effect, then the toilet installation environment needs to be reasonable and appropriate. Therefore, before installation, it is necessary to keep the installed ground level and the sewage pipe unblocked. For the ground, mainly check whether the toilet around the level, the toilet installation position around the ground is in a horizontal line, if the ground is uneven, it should be the ground leveling process.
Split Toilet Installation – The second step of toilet installation
When installing the toilet, it is necessary to pay attention to the docking of the toilet drain pipe and the ground drain pipe, and keep the connection between the pipes close. Generally, the cross center line is drawn at the sewage outlet at the bottom of the toilet, to ensure that the center of the sewage outlet meets the center line of the sewage pipe, and then the installation and fastening of the screws and decorative caps on the ground.
Split Toilet Installation – The third step of toilet installation
After installing the toilet horizontally on the ground, we need to seal the bottom of the toilet, mainly to seal the sewage outlet. Generally, special sealing tools are used: sealing ring or glass glue to seal the bottom. The cement and sand shall be adjusted in accordance with the ratio of 1:3, and the bottom of the toilet shall be brushed and sealed. The balance between the bottom and the left and the right shall be paid attention to when the cement coating is applied.
Split Toilet Installation – The fourth step of toilet installation
After installing the bottom and body of the toilet, we need to install the water tank and other accessories. The water tank is the key to whether the toilet is leaking, so we must pay special attention to the smooth flow and sealing performance of the water tank when installing. During the installation, whether the water tank is smooth or not can be tested by means of water discharge. After 3 minutes of water discharge, the pipe is cleaned and then the corner valve is installed and the hose is connected.
Split Toilet Installation – The fifth step of toilet installation
At the fifth step of the installation process, the installation of the toilet is roughly completed, but we need to ensure the normal use of the toilet, so we need to carry out the inspection and acceptance work. When testing, we should pay attention to whether the water valve is smooth, whether there is water leakage in the tank, whether the flushing process is smooth, etc.
The above is the five-step method of split toilet installation, I hope you can learn a good study, is actually very simple, in real life is also quite easy to use. As we all know, the designs and types of toilets have become increasingly diverse to meet people’s quirky needs, and will continue to change, so let’s hope better products come along.
