The water pressure of tap water is as stable as usual, after the tank is filled with water. Test the toilet to see if it flushes properly. If the water is swirling fast and rushing fast, the water is smooth.
Toilet mounting
Installation point method.
1. Check the levelness of the floor where the toilet is to be installed. If it is found to be inclined, it can be installed only after it is adjusted to the level;
2. Check the sewage pipe of the toilet before installation, and clear the sediment, waste paper and other debris in the sewage pipe;
3. The height of the lower water outlet is reserved 2-5 mm above the ground;
4. After commissioning and installing the water tank accessories, connect the tap water, inject water into the water tank, and then investigate whether the water tank or the water inlet hose has signs of leakage for a few minutes;
5. The water pressure of tap water is the same as that of normal control, and the water tank is filled with water. Test the toilet to see if it flushes properly. If the water swirl is very fast and rushes quickly, it means that the water is smooth, on the contrary, check whether there is blockage.
Toilet installation
1, as above installation points 1, 2;
2, solid seat toilet (proof of the solid way to choose one of the solid way)
Method 1: The method of pulling the explosive bolt firmly, which is designed for the toilet with mounting holes at the bottom. Put the toilet on the installation position, use a pencil to draw the position of the hole and the bottom wheel corridor on the ground according to the location of the installation hole, then remove the toilet, open the hole in the position indicated by the symbol and insert the explosion bolt, apply adhesive to the joint of the toilet seat extrusion port and the ground sewage outlet, put the toilet seat smoothly, firmly pull the explosion bolt, and finally seal the toilet seat foot with cement mortar.
Method 2: Cement bonding method, this method is designed for the toilet without mounting holes at the bottom. Place the toilet on the installation position, use a pencil to draw the bottom of the toilet corridor, lay a circle of cement mortar with a width of 30mm and a height of 15mm inward along the outline line, apply adhesive to the joint of the toilet nozzle and the ground sewage outlet, wipe the toilet foot, and place it in the installation position smoothly to make it bond firmly and wipe the spilled cement mortar.
3. After completing the firm of the toilet, wipe and clean the excess cement adhered to the toilet and the ground immediately;
4, adjacent to the toilet tank and water pipe;
5, check whether the water tank is leaking, and then flush to detect whether the sewage pipe is smooth;
6, after the installation can not be used for three days, with the current cement setting rate at least one day can not be used, so as not to affect its stability.
Toilet seat replacement
Method 1: When changing the toilet seat cover, we need to remove the solid bolt behind the toilet to replace it; During installation, reverse bias operation is required. The same as the usual toilet lid is not divided into sizes, and two bolts can be adjusted when installing. However, it is also necessary to measure the size, screw hole distance, the width and length of the toilet lid, and then purchase a new toilet lid to replace it!
Method two: Go around the toilet, see where the toilet lid screw cap is, and then choose the right wrench, take the screw cap off, the position of the toilet lid screw cap is divided into two kinds of light and dark, the light is easy to find, but the dark screw cap is not easy to see, as usual position is set on the edge of the toilet tank, to open the lid, reach into it, Feel the tank tilt for a screw cap. Installing the toilet lid is really the need to remove the strong bolt behind the toilet, remove the previous toilet lid, and then replace the new toilet lid on the firm screw cap. Now most toilet seats are no size, as long as the screws on both ends of the toilet can be done. However, be sure to measure the size of the toilet before changing the toilet lid, and the width and length of the screw cap from the toilet lid also need to be determined. To avoid buying unsuitable products.
Method 3: The rest of the style of toilet lid installation is also different, the same as the usual situation is the bottom of the toilet lid connected to the position behind the screw up, as long as the hand down to find the two sides of the screw unscrew can take the whole lid down, very simple, you can try.
Way 4: You can find a professional to replace it for you. How much does it cost to replace a toilet seat? If you are looking for a professional team, then the price can not be determined, because of the differences in each place and each individual’s personal fee city, Xiaobian can not give an exact data. Some workers who replace toilet seats offer free replacement, but they have to use the products they provide, and the slightly higher price of the products already covers their labor costs.
The role of the toilet seat
For the toilet, the toilet lid still has many functions:
1, health protection: The toilet in the flushing moment, due to the relationship between the water pressure, many bacteria can fly up, because of the habit of people as usual to bow the button to flush, that is to say, the bacteria will be tens of thousands of enthusiasm to you…
2, respect small animals: in the city, many people like to keep a variety of cute small animals, with a toilet lid will prevent pets from drinking water in the toilet, or even drowning.
3, when a small stool: sometimes, you can cover down and sit as a stool, which situation you understand.
4, reduce odor: flushing time, cover the lid, can be useful to reduce odor.
5, reduce the flushing sound: guests, or other unstool situation, cover the toilet lid, can be useful to reduce the flushing sound.
6, as far as the use of places is concerned, it helps to show humanized services and helps to improve the overall image of service places.
7, one person one toilet, “private bathroom” type of enjoyment makes users feel at ease.
8. Eliminate the signs of squatting on the toilet and extend the service life of the toilet.
9. It is useful to stop the entanglements caused by accidents caused by squatting and stepping on the cover plate and contaminating the skin and venereal diseases or falling down and injuring.
10, reduce sanitary paper and clean water, energy saving.
11, useful to stop interpenetration of fumigation: Because of the toilet mat on the cleaning set, one person for a change, so you can completely prevent the mutual fumigation between the users of Mayong disease.
12, it is conducive to promoting the improvement of the establishment of China’s physical culture and material culture, and will promote the development of the well-being of all mankind.
