In life, we are inseparable from the use of water, about the control of the water switch of the faucet, I believe we are very familiar with, that is, the hot faucet we do not understand or use it? The hot faucet is also called the electric heating faucet, it is very good to solve our daily use of hot water needs, make our life more convenient, and let us no longer touch the cold water in the cold winter, harvest full of warmth. The hot faucet is a new product, the next to give you a detailed introduction to the hot faucet installation method.
The hot faucet is introduced
Namely hot faucet, also known as electric faucet or fast hot water faucet, including the faucet body and water flow control switch, the faucet body is provided with a heating chamber and electrical control chamber, separated by a sealing plate, electrical control chamber is provided with a heating circuit, heating chamber is provided with heat pipe, heating tube power is generally in 2-3KW, 3-5 seconds can be heated out of hot water, The heating tube is connected with the heating circuit, which is characterized in that the heating tube is an insulating heating tube; The insulated heating tube is water and electricity isolation type insulated heating tube; Faucet body is mostly high temperature resistant engineering plastic type, a few are all metal type; The electrical control chamber is provided with an insulated water pressure switch. The heating circuit is provided with an electrical switch, connected with the end of the insulation water pressure switch, water and electricity, temperature controller and dry burning prevention device, can also be provided with leakage protection switch.
Namely hot faucet installation method
The first time to install the fast hot water faucet if the side water heating faucet, it is recommended to clean the iron pipe with a toothbrush, and then use the pressure of tap water to discharge the dirt inside the water pipe, so that the filter in the electric faucet is not easy to plug (filter can be very convenient repeatedly cleaning). After installing the electric heating faucet, first adjust the handle to the “cold water” position, and then open the main valve, and then plug in the power supply for heating after seeing water spurting from the hot water. The subsequent use does not need to consider the above process, nor do you need to pull out the power line. The first use is to prevent dry burning from causing the temperature limiting device to power off and enter the protection state.
1. Remove the original faucet at home and choose the appropriate electric heating faucet according to the water pipe inlet at home. The installation method of lower water intake and side water intake is much the same. Properly fix the product, and connect the corresponding waterways; Turn the handle to let the water flow out and check whether the parts are leaking.
2. Plug the power into the socket and fix the power cord to the wall with a wire card.
3. Turn the handle to the hot water, and turn on the power supply when there is water flowing out. This is the heating indicator light and start heating.
4, before normal use must be tested with an electric pen, just in case.
Warm reminder: in the process of disassembly and installation must remember to close the sluice, when fixing the power line, remember not to damage the power line, to prevent leakage.
The above is the introduction of the hot faucet installation method, I believe we all understand. If it will not be installed, remember to ask professionals to operate, to avoid any accidents. The hot faucet has fast hot water, energy saving, environmental protection, economic benefits and other functions, for us is very convenient, very practical, it can be said that the hot faucet is a modern household appliance necessary, you can buy to try. Here is the introduction of the hot faucet. I hope it can help you.
