After busy work back home, all hope to have a comfortable bath process, then at this time we for the choice of bathroom utensils is very important, today we will talk about the shower faucet, then please follow the footsteps of small series together to understand how to install the shower faucet and shower faucet purchase skills. Check it out with PChouse.
一、淋浴龙头怎么安装
The shower faucet is the water drain valve of the water supply pipe, and the bathroom device that controls the flow of hot and cold water by opening or closing the rotating device. The common shower faucet size on the market is eight inches, four inches and so on. It has the advantages of safety and convenience. But the disadvantage is that the bad spool is easy to damage and leak.
Shower faucets are classified according to the installation method: wall-hanging and wall-entering shower faucets. Wall-hanging shower shower faucet: installed on the wall, faucet body, water distributor, connecting pipe pillar, etc., all protruding from the wall. Into the wall shower shower faucet: only the handle protrudes from the wall, the pipe and water distributor connected to the faucet are mostly buried in the wall, and the appearance is not visible.
一般情况下，淋浴与水龙头是配套安装使用，水龙头离地70-80厘米，淋浴柱高度1.1米，水龙头与淋浴柱连接处长度10-20厘米，淋浴离地2.1-2.2米，消费者购买时要充分考虑卫浴空间大小。淋浴龙头可以墙装、嵌入墙内仅露出手柄，也可以安装在浴缸上。
在安装使用淋浴龙头时，要特别注意淋浴龙头的冷热水供给管，一般情况下，龙头左侧为热水供给管，右侧为冷水供给管。有特殊标记的除外。安装完成后，要将起泡器、莲蓬头等易堵塞的配件拆下，让水流出，彻底清除杂质，再装回去。随龙头附送的工具要保留，以备日后维修。拆卸进水软管时，不要缠密封胶带，不要用扳手，直接用手拧紧软管，否则会损坏软管。壁挂式龙头根据需要确定弯头外露的长度，否则弯头外露墙面过多，影响美观。
Second, shower faucet purchase skills
Shower faucets and bath faucets have many similarities, such as function, use environment, etc., and there are many common points in the choice of products. The biggest difference between them is that the bathtub faucet has a lower outlet, while the shower faucet generally does not. Now there are some shower faucets with water, convenient to wash towels, put hot water supply bucket water, etc. But even then, it is not recommended to use the bathtub faucet instead of the shower faucet. Because the handle of the bathtub faucet is generally horizontal, in the process of showering, it is likely to accidentally touch the horizontal faucet, resulting in a sharp rise or fall in the water temperature. The handle of the shower faucet is generally vertical, which is less prone to misoperation. However, even the vertical faucet will be lifted during use, and there is still the possibility of incorrect operation in the narrow shower room. Therefore, the shower faucet makes us the most recommended class of products using the thermostat faucet. By locking the temperature, not only is the handle not easy to misoperate, but even if the external water pressure changes, or the cold water stops instantaneously, it will not be burned, which is very safe. The shower faucet needs to be equipped with a hand-held shower head for use. If the bathroom space is large, you can consider using the whole shower shower (shower column). This shower column with a large top spray is more comfortable. Two handle shower shower faucet, such as the left hand is hot water, the right hand is cold water, clear identification, easy to use, more suitable for the elderly or children to use. The shape of the single handle is relatively good-looking, simple shape, rotate the left and right to adjust the hot and cold water, easy to operate but need to be careful to use, avoid burning.
material
It is recommended to use all copper shower faucets as far as possible. Today, the process of all copper faucets has been very mature, occupying most of the market share. The real all-copper faucet handle, decorative nut, transfer valve, wall cover, connecting nut and eccentric joint, outlet nozzle shell and other parts are made of brass, after electroplating, not only beautiful thick, but also durable, in the purchase must be asked in detail is a real all-copper faucet, or only the main body is made of copper. In most cases, it is possible to tell whether it is a full copper faucet by weight and sound. Full copper faucets are generally heavy, and the sound is dull and low when struck.
Valve core
Spool as far as possible to use domestic and foreign high-quality brand spool, if you use a constant temperature faucet, spool quality is very important, the use of inferior raw materials, the production of rough constant temperature spool may lead to water temperature instability in use, more dangerous is damaged, resulting in burns. There are two main types of thermostatic spool in the market: one is a Wax Element spool, and the other is a thermostatic spool with Shape Memory Alloys (SMA) springs. At present, domestic paraffin wax is a widely used product, the price is cheap. Memory alloys respond more quickly, but are more expensive and are used in high-end products. The choice of thermostatic faucet must be based on the principle of abundance, poor quality thermostatic faucet may fail in use, resulting in a sudden increase or decrease in water temperature, the consequences are very serious.
After reading this article about how to install shower faucet and shower faucet purchase skills, I hope to help you.
