The use of the shower room not only depends on the quality of the product itself, but also depends on a good installation to a greater extent. The installation process of the shower room is equally important for future use. Improper installation methods sometimes cause problems in daily life, cleaning and safety. Paying attention to the details of the installation can also avoid many decoration regrets.
shower room installation
1. Specify the installation location
When installing a shower room, you first need to clarify the installation location. If the water supply system and tiles have been installed indoors, it is best to customize the shower room. At the same time, the wiring leakage protection switch should also be considered before the shower room is installed to avoid unnecessary rework .
2. Glass top frame installation
The installation of the shower room glass and the top frame needs to be carefully checked. If you are not careful, it is easy to have misalignment or gaps. At the same time, before the top frame is officially fixed and installed, you need to determine the position of the drilling, etc., to avoid misalignment. .
3. Installation of sliding door handle
The installation of the sliding door is an indispensable part of debugging. After the installation is completed, try to push and pull the sliding door repeatedly to ensure that there is no gap in the closure, and at the same time, the pulling is convenient and smooth. After the installation is completed, the waterproof work must be done in time. The glue is applied on the frame and wall to avoid water penetration in the future.
The installation quality of the shower room must be strictly checked. If you do not pay attention to the details, it will easily lead to water leakage and so on.
