With the progress of society and the improvement of people’s living standards, the shower is now an indispensable bath appliance in our daily life. If the shower head is damaged and needs to be replaced, how to install the purchased shower head? Here we will introduce the precautions for the installation of shower showers.
Installation method of shower head
1, in the water mixing valve and shower lift rod comparison, use a ruler to measure the installation hole, and then use a black pen to trace the hole distance size.
2. Drill the hole with the drilling machine according to the size described before, and install the S-shaped joint, which can adjust the direction to facilitate the connection with the shower faucet. The joint should be wrapped with raw tape, and the number of laps should not be less than 30 laps, which can prevent water leakage. Install shower lift seat and eccentric, and then cover the decorative cover.
3. Install the whole support of the shower head, take out the shower head, put the foot pad into the nut, and then connect it with the S-bend connector, and tighten the nut fully with a wrench. Use a level to measure whether the faucet is installed level.
4. Connect the stainless steel hose of the small shower with the transfer switch, and fix the other end of the hose with the small shower by hand.
5. Link the top spray to the top of the support and fix it with a wrench.
以上就是我们今天为大家带来的相关介绍，相信朋友们都有一定的了解，希望本文能够给大家带来帮助。您也可以登录福吾家居网查看和订阅更多相关内容和资讯。
296 likes
