The overall cabinet is more expensive than the ordinary cabinet, table is also one of the large cost, some overall cabinet in use after a period of time due to improper operation or the quality of itself is not very good, there may be cracks, cracks and other situations, not only affect the overall cabinet beauty, the actual use of the owners also has a large impact. So the overall cabinet mesa crack repair must be timely, otherwise the crack is getting bigger and bigger, repair more difficult not to say, the cost will increase more.
High temperature is one of the main factors of table cracking, at the same time, the old driver told us that the table drops on the oil stain slightly later cleaning will penetrate into, so the good table also high temperature resistance, corrosion resistance, penetration resistance. Choose super compound quartz mesa, the surface has no pores, oil, water stains are not easy to penetrate into them, general stains with a wet cloth or detergent can be wiped.
Artificial quartz table stitching, in the connection port must use alcohol or the day of the water to wipe clean, so as to avoid dust at the joint, reduce viscosity, over time from the joint cracking. Table holes should be smooth, not zigzag shape, not a simple right Angle. The four corners should be curved rounded corners with a diameter of not less than 20mm, and be polished with sandpaper to avoid stress points at the opening and cracking when the table is stressed unevenly.
If the table is longer, or the top wall on both sides, in order to prevent the thermal expansion and cold contraction caused by the table crack, there must be an expansion joint. Table against the wall end to leave 3-5mm expansion joint, table is more than 3 meters, the expansion joint should not be less than 5mm. Try to use the cutting board, avoid cutting tools directly on the surface of the table, resulting in uneven stress cracking.
Cabinet table surface fracture, consumers can directly contact the business. General regular brand cabinets, businesses have a good after-sales service system. Mesa fracture is relatively easy to repair, consumers at home to protect the ‘wound’ of the fracture, do not let it continue to damage, retain the ‘fine stubble’, call the business to repair. Businesses will use special glue to rebond and polish, can be good as before. If there has been a crack, consumers can call the business door filling treatment, can prevent the table in the future all fracture.
Table cracking may also be caused by the pad strip below the table, pad plate problem, such as the pad material is poor, sink water seepage or water leakage, plate encounter this situation will expand, resulting in table cracking; In addition, there is no mat under the table whole plate, or pad pad uneven and lead to cracking. In this case, it is necessary to strengthen the plate and cabinet, and then carry out the repair work of the table.
The gap between the glass glue bonded between the table and the wall tile of the cabinet is getting bigger and bigger. This is the aging of the glass glue, which is a normal phenomenon. The glass glue between the table and the wall tile is cracked due to the long time of use, and it can be replayed to solve the crack problem. Before gluing, the remaining old glue should be removed, the adhesive surface should be wiped clean, and the glass glue can be closed and filled.
